Simple low-noise, high quality, in-line microphone preamplifier for ribbon or dynamic microphones with up to 27dB amplification Philosophy. FetHead is a low-noise, high quality, in-line microphone... View more
Rim-mountable mic holder, fully articulating arm, shock-absorbent, vibration-resistant, non-sagging, no scuffs or scratches, fits most drums and mics The Lauten Audio Rim Mount is a versatile,... View more
Cloudlifter 1-channel mic activator, +25dB in-line microphone preamplifier Cloudlifter CL-1 Mic Activator is an easy to use, compact solution for common audio problems faced in the field and in the... View more
Simple low-noise, high quality, in-line microphone preamplifier with up to 18dB amplification and phantom power passthrough to the microphone It was developed after several requests from different... View more
Adapter for Sennheiser SK50/250 Adapter (Fits modelsSK50/250/3063/5012) 3-pin LEMO An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones as... View more
Cloudlifter 2-channel mic activator, +25dB in-line microphone preamplifier Cloudlifter CL-2 Mic Activator is a dual channel, easy to use, compact solution for common audio problems faced in the field... View more
The Sanken Rubber Mount for COS-11 Microphones, RM-11 is a rubber mount designed specifically for use with the HC-11S miniature lavalier microphone Use this practical microphone mount to perfectly... View more
Adapter for Lectrosonics LM, SM, UM Series (low DC micrphones) -TA5F An adapter that connects the d:fine line of headset microphones, the d:screet series of miniature microphones with low DC as well... View more
8-way clip for d:screet SUBMINIATURE microphone, single piece in black When used as a lavalier, a special rotatable clip is available. The 360 clip allows the lav to be mounted in eight positions,... View more
XLR Adapter with BeltClip (MicroDot to 3-Pin XLR) This adapter is active-signal balanced, which improves suppression of induced electromagnetic noise. Common Mode Rejection Ratio (CMRR) is better... View more
Simple low-noise, high quality, in-line microphone preamplifier with new old stock Germanium transistor and up to 29dB amplification for Ribbon and Dynamic microphones It provides a punchy and... View more
Adapter for Sennheiser Evolution/G2/G3/D1, X2 Digital Wireless,Audio Ltd En2 TX The adapter comes with an original DPA MicroDot to Mini-Jack Connector (with thread). It is also available as a fixed... View more
Stand Holder for MD 441/451 The Sennheiser MZQ 441 is an elastic quick release mic clamp, with 3/8", 5/8", and 1/2" thread insert for extremely tough use.
Adapter for Shure U1/UR1/UT1/SC1/SLX1/ULX1, TOA WM4300,PGX1, Line6 XD-V70L The adapter comes with an original DPA MicroDot to a TA-4F Switchcraft. It is also available as a fixed connector.. Flexible... View more
Clip for KM 80, KM 100, KM 180, KM D or KMR series, including XLR connector mount Swivel mount with a plastic clamp for miniature microphones. It has a 5/8"-27 female thread, plus a thread adapter to... View more
Subminiature Mesh for Lavalier Microphone, 1 piece Subminiature Mesh for use with 6000 Series Subminiature Microphones used as lavaliers. Reduces slight wind noise from a speaker's voice or any other... View more
IO Retrofit Quick-Change Coupler - 6 Pack iO-RA is now available in Six Packs. With its reduced packaging and cost, Triad-Orbit is giving studios, content creators and production companies a more... View more
d:screet 4-Way Microphone Clip, single piece in black A versatile, 4-way clip for our omnidirectional lavalier microphones. It allows you to mount the mic in an upwards, downwards, left- or... View more
The Shure A25D is a Break-resistant microphone clip for SM58, SM57, SM87A, Beta 87A, PGA48, PGA57, PGA58, PGA81 and all other microphones with 3/4-inch and larger handles. The Shure A25D is a break... View more
Cloudlifter 1-channel mic activator with variable input impedance, variable low-cut filter and adjustable output level Cloudlifter Mic Activators use phantom power from your preamp to solve an array... View more
Clip to mount the gooseneck of the Miniature Clip Mic system on violin, viola, mandolin and similar instruments Clip for attaching the capsule and gooseneck of the Miniature Clip Mic system to the... View more
SG 2 Stand Mount is for use with the TLM 102/103/170 microphones. It has a metallic construction and sports a black finish. With a 5/8"-27 female thread, the SG 2 Stand Mount features a thread... View more
CUT 60g, 60Hz Active Low-Cut Filter for CMC Series, matte gray The CUT 60 is inserted between the capsule and the microphone amplifier.. It prevents the effect of infrasonic disturbances from being... View more
The Sennheiser MZQ 22 Double Tie Clip is a miniature lavalier clip used to mount a pair of Sennheiser MKE2, MKE102, MKE104 and MKE Platinum series lavalier microphones
The Vclip vampire clip for Sanken COS 11 from LMC Sound is designed to fit your COS 11 microphone. This mount includes a vampire clip Designed by a location sound mixer. The Vclip vampire clip was... View more
Dual microphone mount for SM57 and R121 The R-121/57-styled dynamic mic combo is legendary for capturing electric guitars. With the AxeMount, using these two classic mics has never been easier,... View more
Elastic Suspension for MS with Swivel The base of the AMS 22 has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting.
The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 - 52 V phantom powering (P12 - P48) The connected... View more
