NP1 Adaptor (DATA) shoe - 2x TA4 + master switch Using these connectors will allow you to draw more power from the 8-way distro box, meaning you can use each output on the distro without being... Lire la suite
Spare battery pack for the 7-Series Recorders, 633, PIX 220(i) and PIX 240(i) video recorders. Compatible with Sony L-type camcorder mount. 7.2 V, 6600 mAh.
Sound Device Power Adaptor - Sony DV - Mixpre This will offer an NPF fitting to our SD-1 product which allows you to mount directly to the rear of the mix-pre-unit. . A cable of 30 cm will be offered... Lire la suite
Sound Device Power Adaptor - Mix Pre3/6 - Hirose Adaptor The adaptor slots onto the rear of the mixer just like Sound Devices original battery sled, this will click into place to ensure a secure... Lire la suite
14.4V 50Wh NP1 Lithium-Ion Battery The NP-50 is a unique new Lithium-Ion stubby NP1 Battery. It measures approximately half the height of an industry standard NP1 battery, providing sound recordists... Lire la suite
The eLC-SMB is a low cost, portable Li-Ion charger for our eSMART Li-XXwh lithium battery range The eLC-SMB is a fast, reliable and secure charger for li-ion smart batteries. It charges a 49 or 98 Wh... Lire la suite
Power Adaptor for eSMART lithium Battery 4 power outputs on Hirose compatible connectors switchable 2 by 2. Serial output for optional eSMART BG fuel gauge. 2.5A resetable fuses on each output
The Audioroot ELC-PO10-S charger is fully compatible with our eSMART LiFe-256Wh and eSMART LiFe-576Wh batteries. This Smart Charger is designed to charge 12.8V(4 Cells) LiFePO4 batteries with a... Lire la suite
Sound Device Power Adaptor - Mix Pre3/6 - Canon BP Adaptor The adaptor slots onto the rear of the mixer just like the battery compartment, this will click into place to ensure a secure connection.
Sony NP-F Battery Charger " 2-Channel Simultaneous It has been designed for use with our range of MDV range, However is also 100% compatible with the Sony NP-F series. . 1.8A charge current
95Wh battery designed to work with smart battery power splitters like the SPD-1 Are you tired of running out of battery power unexpectedly during your shoots Are you looking for a battery that not... Lire la suite
Sound Device Power Adaptor - Mix Pre3/6 - Sony DV Adaptor The adaptor slots onto the rear of the mixer just like the battery compartment, this will click into place to ensure a secure connection.
Sound Device Power Adaptor - Sony DV 2x HRS 12V - Mixpre This will offer an NPF fitting to our SD-1 product which allows you to mount directly to the rear of the mix-pre-unit. . SD-6 will also... Lire la suite
The Hawk-Woods SL-1 is suitable for charging one Lithium-ion NP1 battery at a time. This is a low cost unit offering a compact solution as both a camera operators primary charger, or for those... Lire la suite
Active smart battery eliminator with TA4M input connector and smart battery emulator The AUDIOROOT ABE is a battery eliminator which can be used to power smart battery operated devices with an... Lire la suite
L-Mount Battery Sled. Holds one L-Mount battery (not included). Powers MixPre Original Series, MixPre-M Series, and MixPre II Series recorders. To remove the MX-LM1 from the MixPre, press in the... Lire la suite
The Swit S-3602F is a 2-ch SONY NP-F charger and adaptor Dual Channel Simultaneous Charging. S-3602F has 2 charging channels, with DC 8.4V, 2A charging output for each channel, and can charge 2... Lire la suite
NP1 Adaptor - TA4 connector - 4 Outputs Switched NPC power adaptors have all the benefits of the NPB range but are supplied in a different format. The orientation of the fitted adaptor, means that... Lire la suite
NP1 Adaptor - TA4 connector - 4 Outputs Switched 9-12V The NPU-TA4 is fitted with a TA4 connector suited for the Sound Devices Scorpio and also features four switched auxiliaries (Hirose sockets).... Lire la suite
2-Channel NP Lithium-Ion Simulataneous Charger Hawkwoods have given the existing MR2 (NP1)charger a brand new makeover due to a fresh modern design to a charger that has been largely cumbersome for... Lire la suite
NP1 Adaptor " Hirose 4-pin Male " 4 Ouputs Switched The NPB-SQN4S is fitted with an SQN(Hirose) connector and also fully loaded with four switched auxiliaries (Hirose Connectors). These outputs are... Lire la suite
The NP-L7S is the economical version of the NP-L7 battery with 3 LED Power Indicator but no Digi-View feature IDX NP Li-ion batteries can also be charged on ENDURA system V-Mount chargers using the... Lire la suite
The Remote Audio Hi-QCH1 is a battery single bay charger for Hi-Q batteries The Hi-Q batteries are smart. This means they have sophisticated circuitry that balances the charging and discharging of... Lire la suite
Power distributor for sound bag with built-in OLED volt/amp/Ah meter The Audioroot vmDBOX-HRS-cc is an ultra-small, DC power distribution box with 6 DC outputs and an integrated multi function meter... Lire la suite
The Swit SC-302 is a 2-ch Sequential Charger for NP-1 style batteries The SC-302 has 2 NP-1 slots and can charge 2 NP-1 batteries S-8056N one-by-one sequentially. The charging output is DC 14-20V,... Lire la suite
The S-8076N is an NP-1 type rechargeable Li-ion battery pack for professional video cameras, as well as audio mixers with NP-1 battery connection Adopted high quality Lithium cells. Over more than 15... Lire la suite
The Remote Audio Hi-Q98 Batteries is a full size version with a capacity of 98 Watt hours The Hi-Q batteries are smart. This means they have sophisticated circuitry that balances the charging and... Lire la suite
Motorola PMLN7101A charges up to six radios or batteries simultaneously with this compact, multi-unit charger. Each pocket on the charger includes an LED indicator, providing charge status on each... Lire la suite