A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 - 698 MHz while still filtering out unwanted RF.
There are three components that give the QRX200 its enhanced distance / range
New digital modulation
Enhanced receiver design giving it maximum sensitivity while lowering its noise floor
The elimination in any difference between single and dual mode
Side mounted LED's provide visual confirmation of audio and RF reception. A group of 12 multi-colored LEDs are recessed into the side of the QRX200 (Patented). They are visible with the QRX200 mounted in its Zaxcom camera mount and provide the sound mixer with visual confirmation of audio reception at the camera. The LEDs are very bright and can be seen from quite a distance even in bright sunlight.
Receives up to 4 channels of 100% digital audio from 2 transmitters
The QRX200 outputs audio as an analog signal or as an AES digital signal.
Any combination of Zaxcom mono or stereo transmitters can be used with the QRX200.
Caractéristiques
Feed your bandwidth
Range is everything
Zaxcom's all new digital modulation and components gives the QRX200 significantly enhanced distance and range.
Never re-block again
QRX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 26 (512-698MHz)
Double the fun
A single light weight QRX200 can receive audio from two separate transmitters leaving more room in your sound bag for a snack.
Spécifications
Receiver Single Mode Receiver Type: True diversity single conversion digital demodulator Dual Mode Receiver Type: Antenna diversity single conversion digital demodulator RF Modulation: proprietary digital method RF Frequency Range: 512 to 698 MHz RF Frequency Step: 100 KHz RF Bandwidth: 200 KHz Channel Separation: 500 KHz (700 KHz recommended) Sensitivity: -110 dBm Antenna Connector: 50-ohm SMA female
Receiver Audio - Analog Output (x 4) Dynamic Range: 114 dB Distortion: 0.001% DAC Bit-depth: 24 bits Connector: TA-5M Audio Output Level: Line: -10 to 0 dBm active balanced
Receiver Audio - Digital Output (x4) Signal Format: AES Balanced Audio Output Connector: TA-5M
Misc. Weight: 6.0 oz (170 grams) Dimensions: 1.25 x 3.25 x 5.25 (32mm x 83mm x 133mm) External Power: 9 to 18 VDC (300mA @ 12VDC) Internal Power: N/A Display: Graphic OLED Display