SPL Reducer
UPC/EAN #4260149320926
MPN #1160
The Reducer is as simple as the name implies, it reduces the power output of your guitar or bass amp. 200W Point-to-Point Handwired Power Soak
This means that all sorts of amps, especially tube amps, can now be overdriven without the need of having to be too loud.
Just like the Transducer and Cabulator, we developed the Reducer together with the amp specialists from Tonehunter in Cologne, Germany.
The Reducer is connected between guitar/bass amp (head) and the speaker. At this stage, it converts the amp's electric power into heat. Power reduction with resistors requires no additional power supply. The passive principle guarantees an accurate sound reproduction without any influence on the frequency response curve. So the Reducer is neutral, providing just a volume control.
For the amp output, impedance can be set to 4, 8 or 16 Ohm. Reduction is stepwise in the first stages, but it can then be adjusted continuously.
The Reducer is made in Germany and sports hand-wired point-to-point wiring.
Specifications
Input & Output
Input 1/4" TS (Mono Jack), unbalanced
Input impedance: 4, 8, or 16 Ohms switchable
Max. input load:
@4 Ohms: 90W RMS/120W Peak
@8 Ohms: 200W RMS/260W Peak
@16 Ohms: 160W RMS/180W Peak
Output Socket: 1/4" TS (Mono Jack)
Dimensions & Weight
Height: 68mm, 85mm with feet
Depth: 190mm, 208mm with controls and sockets
Width: 179mm
Weight: 1.8kg/3.97 lbs
Write a review about the SPL Reducer
View more products from
SPL
