Sound Devices A-FLIP

UPC/EAN #854454006879 MPN #9820

$105.00

Soyez le premier à écrire une évaluation

Livraison gratuite au Canada pour les commandes de 200 et plus

The A-FLIP adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK.

Supplies Required:

A Phillips head screwdriver

The A-FLIP uses the screws already installed in the A-SL

Four M2.5-0.45 16mm screws

Two M3x0.5 6mm screws

Step 1
Detach the A-SL from the A10-RX by removing the four 16MM screws from the corners. Set the screws aside for reassembly.

Step 2
Detach the A-SL from the back of the A10-RX.

Step 3
Remove the two 6mm screws from either side of the DB-25 connector. Set the screws aside for later use.

Step 4
Slide the connector out of the housing.

Step 5
Insert the A-FLIP into the A-SL housing.

Step 6
Using the two 6mm screws, secure the A-FLIP.
Note that the longer side of the connector is now facing up.

Step 7
Insert the A-SL with A-FLIP back onto the A10-RX.
Use the tab to guide the A-SL to the body of the A10-RX.

Step 8
Replace all four corner 16mm screws, securing the A-SL to the A10-RX.

Step 9
The A-FLIP is now successfully installed and ready to use in any A10-RACK or Sound Devices SL-6.

Évaluations

Aucune évaluation. Soyez le premier à écrire une évaluation

Voir plus de produits pour la marque Sound Devices

Sound Devices A-FLIP

$105.00

The A-FLIP adapter changes the orientation of an A10-RX in an SL-6 or A10-RACK.

Évaluations

Écrire une évaluation à propos du Sound Devices A-FLIP