Livraison gratuite au Canada pour les commandes de 200 et plus
Mic splitter, passive, 1 input, 1 direct out & 2 Jensen isolated outputs
The Radial JS2 and JS3 are Jensen Transformer-equipped mic splitters that allow a balanced source to drive multiple destinations via standard XLR connectors. These passive devices feature a premium nickel laminated core transformer for exceptionally low harmonic distortion without the usual phase shift caused by lesser steel core transformers.
The undisputed benefit of 100% transformer isolation provides better than -90dB common mode noise rejection (CMR), thus eliminating troublesome hum & buzz caused by stray voltage and ground loops. These problem-solvers offer a simple yet highly effective interface for microphones or direct boxes, and with the addition of the -30dB pad, consumer and line level devices may be employed without distortion or fear of overload due to saturation.
The Radial JS2 and JS3 mic splitters feature a rugged 14-gauge steel construction for maximum durability. A unique book-end design creates a protective zone for switches and connectors against the harsh environment of concert touring. An internal welded I-beam skeleton houses the PC board, creating a virtually indestructible monocoque design that makes it impossible to torque the circuitboard. This eliminates stress on the solder points which can cause cold solder joints to develop. This innovative design also has the unique advantage of allowing up to 8 units to be rack-mounted using the Radial J-Rak. The J-Rak is a heavy-duty rack shelf that allows the splitters to span across a vertical array using only two 19" rack spaces.
The Radial JS2 and JS3 mic splitters are easy to use, flexible and sound great!
Caractéristiques
Jensen transformer-equipped for optimal signal transfer
Choice of 2-way or 3-way designs for extra flexibility
Compact design , up to 8 may be rack mounted in J-Rak
Ultra rugged 14-gauge steel construction for added durability
Spécifications
Audio circuit type : Passive mic/line splitter, transformer based
Number of channels : Three-way splitter (one in/three out)
Frequency response : 20Hz ~ 20KHz (+0dB/ -2dB)
Dynamic range : 140dB
Maximum input : +25dBu @ 1kHz
Total harmonic distortion : 0.0005% @ 1kHz
Phase deviation : 0.7 @ 100Hz; 2.8 @ 20Hz
Input impedance : 2.4k Ohms, unbalanced
Output impedance : 150 Ohms, balanced
Features
JS2 transformer : JT-MB-CPC, 1:1 ratio
JS3 transformer : JT-MB-DPC, 1:1:1 ratio
Shield : Dual Faraday, MuMETAL can
Input pad : -30dB (allows line-level sources)
Ground lift : Disconnects XLR pin-1 at direct-2 and isolated output
XLR configuration : AES standard (pin-2 hot)
Connectors : XLR-F in, XLR-M direct; direct-2; isolated outputs
General
Construction : 14 gauge steel chassis & outer shell
Finish : Durable powder coat
Size : (W x H x D) 84 x 127 x 48mm (3.3" x 5.0" x 2")
Weight : 0.70 kg (1.55 lbs)
Shipping size : W x H x D : 102 x 76 x 165mm (4" x 3" x 6.5")
Shipping weight : .87 kg (1.92 lbs)
Power : Passive, no power required
Conditions : For use in dry locations only between 5C and 40C
