Cardioid KK 104 condenser capsulehead for wireless systems with 3rd party interface, black finish Compared to dynamic microphones, the Neumann KK 104 U and KK 105 U offer a vastly superior transient... Lire la suite
Swivel joint for KM D and KM A, ± 110 swiveling The SG 110 nx swivel mount can be inserted between KK 1... capsules and the KM A/D output stage. The capsule can then be swiveled and orientated... Lire la suite
Stereo mount for MS stereo recordings with two detached capsules The STH 120 stereo mount accepts two detached miniature microphone capsules, parallel and one above the other for MS stereo... Lire la suite
Swivel clamp for KVF goosenecks to stands Mount to attach a KVF... capsule extensions of the old Neumann KM 100 system onto a tripod. Especially suited for holding long KVF... It has a 5/8"-27... Lire la suite
Connection cable for the Neumann MCM System, 1.8 m, to 3pin Lemo. Includes (1) AC 32. Cable for connecting the Miniature Clip Mic system to bodypack transmitters with a three-pin LEMO connector, 1.8... Lire la suite
Round table stand, iron, 4.3 in diameter, 3.5 lb The MF 3 is a table stand with iron base, 1.6 kg in weight, 110 mm in diameter. It has a black matte finish. The bottom is fitted with a non-slip... Lire la suite
Elastic suspension for D-01, TLM49, Black The EA 2 has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Elastic suspension for D-01, TLM49 The EA 2 has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.
Stereo mount with a swivel mount and two holders for detached miniature microphone capsules Stereo mount with a swivel mount and two holders, for two detached miniature microphone capsules. Two... Lire la suite
Cable suspension with threaded stud for swivel mounts and shockmounts. The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts.. The... Lire la suite
Shockmount for KM 80, KM 100 or KM 180 Series The EA 2124 A mt is able to accept microphones from 21 to 24 mm in diameter. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to... Lire la suite
Headphone style windscreen for KU 100 , -15 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid... Lire la suite
Extension for microphone stands The STV 4 stand extension is screwed between microphone stands (for example MF 4, MF 5) and swivel mounts (for example SG 21 bk). Length 40 mm. Ø 19 mm
Supercardioid KK 105 condenser capsulehead for wireless systems with 3rd party interface, black finish Compared to dynamic microphones, the Neumann KK 104 U and KK 105 U offer a vastly superior... Lire la suite
clip to mount the gooseneck of the miniature clip mic system on the strings of a cello Clip for attaching the capsule and gooseneck of the Neumann Miniature Clip Mic MCM system to the strings of a... Lire la suite
Windscreen made out of open-cell polyurethane foam for U 89 or TLM 193, -27 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the microphone boom, all may... Lire la suite
Supercardioid KK 105 condenser capsulehead for wireless systems with 3rd party interface, nickel finish Compared to dynamic microphones, the Neumann KK 104 U and KK 105 U offer a vastly superior... Lire la suite
Floor stand with gray cast iron base Floor stand with gray cast iron base. The floor stand has a matt black finish and rests on a non-skid rubber disk attached to the bottom. A reversible stud and a... Lire la suite
Cable suspension with threaded stud for swivel mounts and shockmounts The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts.. The... Lire la suite
Windscreen made out of open-cell polyurethane foam for U 67, U 87, TLM 103, TLM 50, TLM 127, M 147 Tube and TLM 170, -26 dB wind noise attenuation, -3 dB @ 15 kHz Windscreen WS 87 Close range sounds,... Lire la suite
Floor stand with gray soft-touch powder coating Floor stand with gray soft-touch powder coating. It has a non-skid sound-absorbing rubber disk attached to the bottom. The stand connection has a 3/8"... Lire la suite
Windscreen made out of open-cell polyurethane foam for D 01 Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds,... Lire la suite
Windscreen made out of open-cell polyurethane foam for KK 104, 105, KMS 104, 105, 140 or 150, -27 dB wind noise attenuation, -3 dB @ 15 kHz Close range sounds, wind, and fast movements of the... Lire la suite
Small table stand with brass base, very sturdy Small table stand with brass base, very sturdy. It has a black matte finish. The bottom is fitted with a non-slip rubber disk. The stand has a 3/8"... Lire la suite
Extension for microphone stands The STV 20 stand extension is screwed between microphone stands (for example MF 4, MF 5) and swivel mounts (for example SG 21 bk). Length 200 mm. Ø 19 mm.
Gray foam windscreen made out of open-cell polyurethane foam for Sennheiser ME67 and Neumann KMR 82i. -15 dB wind noise attenuation, -3 dB @15 kHZ Close range sounds, wind, and fast movements of the... Lire la suite
Swivel mount for detached miniature microphone capsules Swivel mount for detached miniature microphone capsules. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M 6... Lire la suite
