MPN #PMC8-2 SUB-R    

$7535.00

Financing available
Free shipping in Canada. Conditions

Active sub with 2 x 8 inch bass units for use as dedicated sub or to complete the Right channel of a 6-2 or 8-2 XBD system



The PMC 8-2 SUB is a true low-frequency monitor like the PMC8 SUB and offering the same DSP engine and seamless integration with surround and immersive systems, the PMC8-2 SUB betters the spec of its smaller sibling, offering higher maximum SPL output down to 25Hz.

With the same dimensions as the PMC8-2 midfield monitor, the PMC8-2 SUB?s twin eight-inch bass drivers are powered by independent 400W Class-D amplifiers. The same configuration options are available as on the PMC8 SUB, likewise accessible on the speaker?s rear panel or by using the browser-based SoundAlign software via a LAN-connected tablet, smartphone or computer.

The PMC8-2 SUB can be used as a standalone subwoofer for multichannel and immersive sound systems, or as an XBD cabinet with either PMC6-2 or PMC8-2 s, creating a system of awesome power and dynamic range. The sub is available in either left- or right-handed cabinet versions (PMC8-2 SUB-L or PMC8-2 SUB-R), to allow placement of the bass drivers on the outside edges of a stereo array, matching the arrangement of the main monitors.
  • Active subwoofer with twin 8-inch bass drivers and ATL bass loading
  • Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
  • Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half space measurement.
  • Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 2 x 400W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ?through? output (AES3 24-bit, 96kHz)
  • SoundAlign network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode
  • Type:
    Active subwoofer with twin 8-inch bass drivers and ATL bass loading

    Drive Unit Complement:
    LF PMC 200mm (8?) studio 8 driver

    Effective ATL Length:
    3m (9.8ft)

    Frequency Response:
    25Hz - 500Hz (- 3dB) (@1m full space, on-axis)

    Sensitivity:
    +4dBu input signal = 98dB SPL @ 1m

    Max continuous SPL:
    115dB @1m
    (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    Max Peak SPL:
    121dB @1m
    (Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    Input:
    XLR switchable between analogue & digital AES3
    Analogue input
    - +20/+24dBu max. input level (selectable)
    - 22K ohm input impedance Digital input - 16/24-bit AES3 signal, left, right or left + right
    - 18 - 192kHz Sample Rate
    - 110 ohm input impedance Expansion card slot
    - For future connectivity upgrades

    Output:
    XLR digital AES3 (fixed 24-bit @ 96kHz)
    Network RJ45 for use with PMC SoundAlign web interface

    Features:
    Level Trim (+/-10dB)
    High-pass/Low-pass filter (20 - 200Hz, 12dB/Oct)
    Delay (0 - 30mS)
    Phase (normal or inverted)
    LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
    Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
    User presets (3 + factory defaults)

    Latency:
    2.4mS

    Amplifier power per channel:
    300Wrms

    Mains:
    100 - 240VAC auto-switching, 50-60Hz (IEC C14)

    Power consumption (idle):
    25W

    Power consumption (max):
    300W

    Cabinet dimensions:
    H 266mm (10.5?)
    W 551mm (21.7?)
    D 440mm (17.3?)

    Weight:
    18.5kg (40.8lbs) each

    Available Finishes:
    Studio black
    View more products from PMC
    PMC Logo
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.