Cardioid capsule head, nickel, capsule woodbox. Compatible with KM A (analog) or KM D (digital) output stages. Black finish
The KK 184 is a pressure gradient transducer with cardioid characteristic. The frequency curves are very even and parallel to 0 sound incidence. In typical usage, there is no coloration of sound over a wide pickup angle.
Caractéristiques
Nextel Black
Cardioid Polar Pattern
User installable
Non-reflective finish
Spécifications
Acoustical operating principle: Pressure gradient transducer Directional Pattern: Cardioid Frequency Range: 20 Hz...20 kHz Sensitivity at 1 kHz into 1 kohm: 15 mV/Pa Rated Impedance: 50 ohms Rated load impedance: 1000 ohms Equivalent noise level, CCIR¹: 22 dB Equivalent noise level, A-weighted²: 13 dB-A Maximum SPL for THD 0.5%³: 138 dB Maximum SPL for THD 0.5% with preattenuation: 148 dB Signal-to-noise ratio, CCIR (re. 94 dB SPL): 70 dB Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 81 dB Supply voltage (P48, IEC 61938): 48 V Current consumption (P48, IEC 61938): max. 3.5 mA Matching connector: XLR 3 F Weight (output stage): 70 g Weight (capsule only): 15 g Diameter: 22 mm Length (capsule only): 18 mm Length (microphone): 108 mm
¹ according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
² according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
³ measured as equivalent el. input signal measured as equivalent el. input signal according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
