Neumann KH 310 A Pair with 2 x Sound Anchors ADJ2 - 44" (Pair)
$8299.00 (Special)
Save $287.00, Regular $8586.00
Neumann KH 310 three-way active tri-amplified monitors with a pair of Sound Anchors ADJ2 - 44".
The KH 310 A features a Mathematically Modeled Dispersion Waveguide (MMD), flexible acoustical controls, various input options and an extensive range of mounting hardware. This allows the loudspeaker to be used in diverse acoustical conditions, with any source equipment and in a wide variety of physical locations. The KH 310 represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible.
It can be used in project, music, broadcast centers, OB vans, and post production studios for tracking, mixing, and mastering.
Sound Anchor ADJ2 Stands are designed to make proper speaker placement possible. When monitors are positioned properly on rigid stable platforms they work better and the sound is enhanced. The entire sound field has more clarity, tones are more accurate, dynamic contrasts are greater and subtle anomalies in the mix are more apparent. The ADJ2 is ideally suited to the new breed of midsized super monitors that have recently become popular in studios.
The base of the ADJ2 stand is 17" X 23". This stand works best for speakers that have a width no wider than 24 inches and a depth no greater than 18 inches. Smaller speakers will also work on the ADJ2s. The common solutions for speaker support (shelves, flimsy wall mounts and meter bridges) are not good solutions. They do not isolate your monitors from your electronics, your monitors from each other or your monitors from the structure. Along with these three drawbacks they seldom position your monitors exactly where they need to be for best sound. Sound Anchor stands address and eliminate these three drawbacks.
The Sound Anchors ADJ2 stands allow the engineer to correctly place a pair of monitors behind his console. These stands allow height and tilt adjustment of the monitors. The 17" x 23" base and the upright are filled and damped from the factory. ADJ2 stands offer a very solid, stable and non-resonant support for your speakers. The speaker platform is made of 1/4" aluminum which reduces the amount of energy that gets transferred into the stand. The Sound Anchor ADJ2 stands isolate the speakers from the console, each other and the floor which gives you a cleaner, more detailed and more accurate sound.
Sound Anchor ADJ2 stands are ideal for:
1. Music control rooms.
2. Surround sound monitoring.
3. CD mastering.
4. Radio and television broadcasting studios.
5. Film post production.
6. Video game production.
7. Online audio production.
Features
KH 310A
Powerful alloy fabric domeElliptical Mathematically Modeled Dispersion (MMD) waveguide, with wide horizontal and narrow vertical dispersionFabric dome, neodymium magnet, midrange driverLong throw composite sandwich cone bass driver with Extremely Linear Force Factor (ELFF) and ribbed surroundTwo-color + dimmable Neumann logoCompact sealed three-way cabinet design (magnetically shielded)One-piece front panel with no discontinuitiesPowerful analog class AB amplifiers with large headroomIndependent thermo limiters for woofer, midrange dome and tweeter to protect the voice coils. Woofer soft clip and excursion limitersProduction consistency due to individual hand-alignment in final test4-position bass, low-mid and treble acoustical controlsWide range input gain and output level controlsGround liftUniversal switched-mode power supply (100 ... 240 V)Extensive mounting hardware optionsOptional robust metal grilleOptional transportation accessories
Specifications
KH 310A
Acoustical:
Free field frequency response: 34 Hz - 21 kHz, ± 3 dB
Pass band free field frequency response: 36 Hz - 20 kHz, ± 2 dB
Self-generated noise (with input gain set to 100 dB for 0 dBu): < 20 dB(A) at 10 cm
Total harmonic distortion < 0.5 % at 95 dB SPL at 1 m: > 85 Hz
Max. SPL in full space / calc. in half space at 3% THD at 1m: 114.2 / 120.2 dB SPL (averaged between 100 Hz and 6 kHz)
Bass capability: Max. SPL in half space at 3% THD at 1m 111.3 dB SPL (averaged between 50 Hz and 100 Hz)
Max. short term SPL with IEC-weighted noise (IEC 286-5) at 1 m, in typical listening conditions: 113 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical listening conditions (pair): 100 dB(C) SPL (full range), 107 dB(C) SPL (with subwoofer)
Max. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair): 93 / 99 dB(C) SPL (full range), 94 / 100 dB(C) SPL (with subwoofer)
Electronics:
Bass / Midrange / Treble Class AB amplifiers, cont. (peak) output power*: 150 W (210 W) / 70 W (90 W) / 70 W (90 W)
Controller design: Analog, active
Crossover frequencies: 650 Hz / 2 kHz
Crossover slope: 24 dB/oct, 4th order
Equalization - Bass: 0, 2.5, 5, 7.5 dB
Equalization - Low Mid: 0, 1.5, 3, 4.5 dB
Equalization - Treble: +1, 0, 1, 2 dB
Protection circuitry: Independent thermo limiters for woofer, midrange dome and tweeter. Woofer soft clip and excursion limiters
Infrasonic filter - frequency; slope: 15 Hz; 6 dB/oct
Input: XLR, analog electronically balanced
Impedance, electrically balanced: > 13k Ohms
Input gain control (sensitivity): 0 dB to 15 dB
Output level control: 94, 100, 108, 114 dB SPL
CMRR: > 56 dB @ 100 - 15 kHz
Max. input level: +24 dBu
Other:
Displays and indicators - power on Neumann logo "White"
Displays and indicators - limit / clip Neumann logo "Red"
Mains Power Supply, voltage; frequency 100-240 V~; 50/60 Hz
Power consumption - idle 24 W
Power consumption - full output 300 W
Mechanics:
Cabinet surface finish, colour: Painted wood and polyurethane, Anthracite (RAL 7021). Aluminum electronics panel, Black.
Baffle cover: Optional removable metal grille
Operating conditions: +10 C to +40 C (+50 F to +104 F), <90% RH, non-condensing
Transport/storage condition: 25 C to +70 C (13 F to 158 F), <90% RH, non-condensing
Drivers: Magnetically shielded
Woofer: 210 mm (8 1/4")
Midrange: 75 mm (3")
Tweeter: 25 mm (1")
Mounting points: 2 x M8 on side panels, depth from outside of cabinet 25 mm (1"). Rear panel screws for attaching LH 41 base plate. Rear panel bracket.
Product dimensions (height x width x depth), mm (inches): 253 x 383 x 292 mm (10" x 15 1/8" x 11 1/2")
Net volume, internal / external: 16.2 liters / 28.3 liters
Product weight: 13.0 kg (28 lbs 11 oz)
Packed dimensions (height x width x depth), mm (inches): 590 x 380 x 360 mm (23 1/4" x 15" x 14 1/8")
Packed weight and cube: 16.8 kg (37 lbs 1 oz), 0.081 m³
Sound Anchors ADJ2:
Heights: 44"
Speaker Platform Sizes: 12" X 16" (default size) or any ADJ1 size.
Sound Anchor ADJ2 Adjustable Speaker Stands are hand crafted in the USA.
Includes:
2 x Neumann KH 310 A
2 x Sound Anchors ADJ2 - 44"
Write a review about the Neumann KH 310 A Pair with 2 x Sound Anchors ADJ2 - 44" (Pair)
View more products from
Neumann
