Professional active subwoofer with 350W rms buit-in amplifier BASH technology and 11 inch woofer
The Sub6 is a large volume cabinet design, equipped with an 11" woofer and a rear laminar port. This configuration guarantees bass linearity whatever the intended SPL.
The control board is extremely versatile, with connectivity which allows a 2.1, 2.2 and multichannel use via the L/R inputs and outputs and the LFE.
The numerous settings such as the high-pass crossover dedicated to monitors, the adjustable phase and level control provide optimum coupling with the Solo6 Be and the Twin6 Be monitors. And finally, a small, but important point: the footswitch input. It enables one to connect a pedal to deactivate the subwoofer and the high-pass crossovers on the outputs that supply the monitors. This simplifies and greatly improves control during the different stages in monitoring.
FOR OPTIMAL INTEGRATION
The Sub6 monitor loudspeaker was developed to perfectly complement the acoustics of Focal monitoring loudspeakers. It features numerous settings such as a stereo high-pass crossover (75Hz - 100Hz) specific to left and right loudspeakers, a configurable low-pass filter with mono summation, a phase inverter, adjustable phase and even a MUTE switch. The various connectivity options enable use in 2.1, 2.2 and multi-channel modes, via the L/R inputs and outputs, and the LFE input.
THE ?LITTLE EXTRA' WHICH MAKES THE DIFFERENCE
A major advantage of the Sub6 is its footswitch input. This allows you to connect a footswitch which cuts off the subwoofer and deactivates the high-pass crossovers on the outputs powering the monitors. The footswitch input enables you to compare the sound of a 2.1 set-up (Sub6 filtered + monitors filtered by the Sub6) with that of a 2.0 set-up (subwoofer deactivated + monitors in wideband mode). The two versions can be compared instantly, simply by pressing the footswitch: you barely have to move a muscle.
Spécifications
Performance Frequency response: 30Hz - 250Hz Maximum SPL: 116dB SPL (peak @ 1m)
Electronic section Inputs Right, left, LFE
Type / Impedance: Electronically balanced / 10 kOhms
Connector: XLR 3 points socket
Sensitivity: Adjustable
Outputs (towards satellites) Right, left
Type/Impedance: Electronically balanced / 50 Ohms
Connector: XLR 3 points plug
Signal internal treatment and functions Subwoofer section
Mono right/left summation
LFE + mono low-pass
24dB / octave
Phase adjustment
Polarity selection switch
Switch high-pass filter, cut-off frequency selection
Satellite section
24dB / octave
Control
Adjustable subwoofer level
Low-pass cut-off frequency setting
Phase adjustment
Polarity adjustment
Subwoofer switch (mute)
2.1 "Bypass" (external remote control)
High-pass frequency selection
Releasable high-pass
Visualization (LED)
Power On
Subwoofer switch(mute)
Released high-pass
Power supply
Local supply: 230V (1.6A fuse) or 115V (3.15A fuse)
Cabinetwork Construction: 71/2" (19mm) MDF panels Finish: Dark red natural veneering side panels, black body Dimensions (HxLxD): 1415/16 x 139/16 x 175/16" (380mm x 344mm x 440mm) Weight: 50.7lb (23kg)
Apporte la dimension manquante, la profondeur, la rondeur, la puissance tranquille. Pièce indispensable du puzzle.
5.0
Geoff Allan VO
Montreal
30 avril 2017
Focal Sub6 Be matched up with Focal Twin 6 pair
A refined, polished, upfront, uncolored sound now complemented by the fantastically rich bass of the Sub6 Be. The berilium tweeter of the Twin 6 pair projects high notes with such delivery the hair of the cochlea get tickled. Really.
