Compact 2-way studio monitor with a 4" flax woofer and 1" aluminum-magnesium tweeter, 60 Hz - 35 kHz range, passive radiator for enhanced bass
Whether you have a room of less than 107ft2 (10m2), or an installation where compactness is paramount, Shape 40 is the perfect solution.
The three monitors are all made in France and integrate five innovations to maximise acoustic transparency. Designed to meet the needs of nearfield monitoring, Shape monitors combine an ingenuous design and numerous settings optimised for the acoustics of small listening rooms.
These innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image. The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalisation of these essential registers much easier. Finally, the new tweeter is what's at the source of the very high definition. It efficiently reveals any hissing, and it's also very precise in the very high end.
Caractéristiques
Low tweeter directivity for a flexible listening position
Designed without a port allowing it to be placed near a wall
Numerous settings for optimal integration
Accurate control, even in the very high end
Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers.
Threads for ceilling and wall mounts (fastening accessories not supplied)
Spécifications
System Frequency response (+/-3dB): 60Hz - 35kHz Maximum SPL (musical signal): 102dB SPL (peak @ 1m)
Electronic section Inputs/Impedance Type
XLR: balanced 10kOhms
Connectors
RCA: unbalanced 10kOhms with sensitivity compensation
Midrange and low frequency amplifier: 25W, class AB High frequency amplifier: 25W, class AB
Automatic standby Standby on
After approximately 30 minutes with no signal
Standby off
Signal detection > 3 mV
Electrical Supply Voltages
220-240V (T500mAL / 250V fuse)
100-120V (T1.6AL / 250V fuse)
Connection
IEC plug and detachable power cord
Settings High pass filter: Adjustable Full range / 80Hz Bass (0 - 250Hz): Adjustable, +/-6dB Midrange/bass (160Hz, Q=1): Adjustable, +/-3dB High (4.5 - 35kHz): Adjustable, +/-3dB Power On/Power Off: On/off switch on rear panel Standby consumption: < 0.5W Displays and controls: LED for power on/off and standby
Cabinet Construction: 0.5" (12mm) MDF Finish: Vinyl, real walnut and black painting Dimensions with four rubber feet (HxWxD): 10.1 x 6.3 x 7.9" (257 x 161 x 200mm) Weight: 16.1lb (5kg)
