UPC/EAN #827517770369     MPN #DK7    

$3499.00

Financement disponible

Drum mic kit, includes 4 DM20, 2 SR25, 1 SR20LS, 4 RM1, 3 MC1, assorted windscreens and high impact case



Seven Alone. One Together.
On their own, each microphone in the Earthworks DK7 kit is best in its class. When combined, they capture the full complexity of your drumkit.

Your Drums. Your Sound.
The DK7 makes whatever drum kit you're miking sound like just thatyou. A crystal clear translation of your sound.

Lightning Fast
Nothing compares to the lightning speed of the DM20. Every detail, every nuance, and every texture remains flawlessly intact.
Bring It All Together
A perfect sonic image of your whole kit from above. A matched pair of Earthworks SR25s bring transparency, clarity, and attack to your drum sound.

Punch Through the Mix
With handling capabilities of 150dB SPL, and a cardioid condenser capsule that captures the full spectrum of sound all the way down to 20Hz, the Earthworks SR20LS captures every detail you're after.

Isolation Like Never Before
Massive rear rejection and a polar pattern that's consistent across the entire frequency range means any off-axis leakage is virtually nonexistent.
Includes:
(4) DM20 Microphones
(2) SR25 Microphones
(1) SR20LS (low sensitivity) Microphone
(4) RM1 RimMount?
(3) MC1 Microphone Clip
(4) PW1 Foam Windscreen
(3) SRW3 Foam Windscreen
(1) Rugged Case

DM20
Frequency Response: 20Hz - 20kHz
Polar Pattern: Cardioid
Sensitivity: 8mV/Pa (-42dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Max Acoustic Input: 150dB SPL
Signal-to-Noise Ratio: 74dB A-weighted
Output: XLR (pin 2+)
Output Impedance: 200 balanced (between pins 2 & 3)
Min Output Load: 1000 between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions (L x D): 282mm x 22mm (11.12 x .860 inches)
Gooseneck Length: 121mm (4.75 inches)
Weight: .55 lb. (.25kg)

SR25
Frequency Response: 20Hz - 25kHz
Polar Pattern: Cardioid
Sensitivity: 10mV/Pa (-40dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Max Acoustic Input: 145dB SPL
Output: XLR (pin 2+)
Output Impedance: 65 balanced (between pins 2 & 3)
Min Output Load: 600 between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions (L x D): 165mm x 22mm (6.5 x .860 inches)
Weight: .35 lb. (160g)

SR20LS
Frequency Response: 20Hz - 20kHz
Polar Pattern: ardioid
Sensitivity: 3mV/Pa (-50dBV/Pa)
Power Requirements: 24-48V Phantom, 10mA
Max Acoustic Input: 150dB SPL
Signal-to-Noise Ratio: 74dB A-weighted
Output: XLR (pin 2+)
Output Impedance: 200 balanced (between pins 2 & 3)
Min Output Load: 1000 between pins 2 & 3
Noise: 20dB SPL equivalent (A weighted)
Dimensions (L x D): 192mm x 22mm (7.57 x .860 inches)
Weight: .36 lb. (164g)
Voir plus de produits pour la marque Earthworks
Earthworks Logo
Maintenant offert
Financement disponible
Aimez-nous
Suivez-nous
©2004-2024 - Studio Economik Inc.® Tous droits réservés.