The 4088-DP-A-B03-LH is a black 4088 CORE+ directional headset microphone featuring a 3-pin LEMO connector, built for professional wireless systems that demand precise vocal capture with maximum speech intelligibility and background noise rejection. Designed for use in theater, broadcast, corporate AV, and house of worship settings, this cardioid headset mic is a go-to choice when clarity and control are essential.
Powered by DPA's CORE+ technology, the 4088 offers an incredibly clean and dynamic audio response, while its directional pickup pattern focuses on the speaker's voice and minimizes ambient sound"ideal for noisy or acoustically challenging environments. The dual-ear frame ensures a secure and comfortable fit, and the adjustable boom can be worn on either side. Engineered for reliability, the mic features moisture-resistant materials, a robust build, and DPA's precision tuning-delivering pristine performance in both rehearsals and live productions.
Caractéristiques
Focused Directional Audio Pickup: Supercardioid design captures voice clearly while reducing surrounding noise-ideal for loud or live environments.
CORE+ Technology for Clarity: Enhances dynamic range and reduces distortion, delivering consistent, high-quality sound.
3-Pin LEMO Connector: Offers a secure, professional-grade connection with compatible wireless systems.
Sweat- and Moisture-Resistant: Built with water-resistant materials and a protective design for dependable use in demanding conditions.
Flexible, Reversible Boom Design: Boom arm can be worn on either side for comfortable, adjustable placement.
Professional Black Finish: Suited for theater, broadcast, worship, and corporate use where low visibility is preferred.
Spécifications
Model
4088 DP A B03 LH
Microphone Type
Directional headset microphone
Cardioid polar pattern
Pressure gradient operation principle
Pre polarized condenser capsule
Frequency Response
100Hz to 20kHz
2 to 4dB soft boost at 10 to 12kHz
Sensitivity and Noise
Sensitivity 6mV per Pa minus 44dB re 1V per Pa
Equivalent noise level A weighted typically 26dB A max 28dB A
Equivalent noise level ITU R BS.468 4 typically 38dB max 40dB
Distortion and SPL Handling
THD less than 1 percent up to 138dB SPL peak
Max SPL at 10 percent THD 144dB SPL peak
Dynamic range typically 111dB
Impedance and Connectivity
Rated output impedance 30 to 40 ohms
Cable drive capability up to 300 meters with DAD6001 BC XLR adapter
Connector type 3 pin LEMO
Power Requirements
Wireless systems 5V to 10V through DPA adapter
With DAD6001 BC P48 phantom power or will work from 12V
Current consumption typically 1.5mA microphone 3.5mA with DAD6001 BC
Physical Specifications
Weight 14 grams including cable and connector
Microphone diameter: 5.4mm
Cable length: 1.2 meters
Cable diameter: 1.6mm
Color: black
Environmental
Temperature range minus 40 to 45 degrees Celsius
Relative humidity up to 90 percent
Design Features
Detachable mic boom for left or right side configuration
Double vent protection system with drop stopper
Water resistant internal construction
CORE plus technology for reduced distortion and enhanced clarity
Microphone polarity positive pressure gives positive voltage on LEMO pin
