DPA 4066-OP-A-F90-LH

MPN #4066-OP-A-F90-LH

$1072.00

Financing available

Be the first to write a review

Free shipping in Canada. Conditions

d:fine CORE+ 4066 omnidirectional headset mic, beige, MicroLock connector included

The 4066-OP-A-F90-LH is a beige CORE+ omnidirectional headset microphone with a secure MicroLock connector, designed for professional-grade wireless audio systems. Featuring a natural skin-tone finish and low-profile form factor, it's an ideal solution for performers, presenters, and broadcasters who require high-fidelity sound with minimal visual presence.

With DPA's advanced CORE+ technology, this microphone offers exceptional clarity and an expansive dynamic range, capturing every nuance of speech and vocals without distortion-even in high SPL environments. The dual-ear headset ensures a stable, comfortable fit for long wear, and the boom can be positioned on either side for personalized use. Resistant to humidity and sweat, and fortified with a double-vent protection system, the 4066-OP-A-F90-LH provides reliable, high-quality performance in even the most challenging professional environments.

Features

Crystal-Clear Omnidirectional Sound: Captures voice naturally with high clarity and ample headroom for professional speech and performance.

CORE+ Technology for Enhanced Audio: Minimizes distortion and delivers a wide, consistent dynamic range.

Reliable MicroLock Connector: Offers a secure, stable connection for use with compatible wireless systems.

Durable and Sweat-Resistant: Engineered with a double-vent system and water-resistant materials for dependable performance.

Flexible, Reversible Boom Arm: Mic boom can be worn on either side for personalized comfort and optimal placement.

Beige Finish for Discreet Visibility: Blends subtly with skin tones-ideal for on-stage, broadcast, and presentation settings.

Specifications

Model

4066 OP A F90 LH

Microphone Type

Omnidirectional headset microphone

Pressure operation principle

Pre polarized condenser capsule

Frequency Response

20Hz to 20kHz

Soft boost grid 40Hz to 20kHz with 3dB boost at 8 to 20kHz

High boost grid 40Hz to 20kHz with 10dB boost at 12kHz

Sensitivity and Noise

Sensitivity 6mV per Pa minus 44dB re 1V per Pa

Equivalent noise level A weighted typically 26dB A max 28dB A

Equivalent noise level ITU R BS.468 4 typically 38dB max 40dB

Distortion and SPL Handling

THD less than 0.5 percent up to 133dB SPL RMS 136dB SPL peak

THD less than 1 percent up to 136dB SPL RMS 139dB SPL peak

Max SPL at 10 percent THD 144dB SPL peak

Dynamic range typically 111dB

Impedance and Connectivity

Rated output impedance 30 to 40 ohms

Cable drive capability up to 300 meters with DAD6001 BC XLR adapter

Connector type MicroLock

Power Requirements

Wireless systems 5V to 10V through DPA adapter

With DAD6001 BC P48 phantom power or will work from 12V

Current consumption typically 1.5mA microphone 3.5mA with DAD6001 BC

Physical Specifications

Weight 14 grams including cable and connector

Microphone diameter: 5.4mm

Cable length: 1.2 meters

Cable diameter: 1.6mm

Color: beige

Environmental

Temperature range minus 40 to 45 degrees Celsius

Relative humidity up to 90 percent

Design Features

Detachable mic boom for left or right side configuration

Double vent protection system with drop stopper

Water resistant internal construction

CORE plus technology for distortion neutralization across dynamic range

MicroLock connector system for secure and reliable connection

Microphone polarity positive pressure gives positive voltage on MicroLock pin

Reviews

No reviews. Be the first to write a review

View more products from DPA