Désolé, le produit DPA 4017B-R with Rycote Windshield n'est malheureusement plus disponible sur le site de Studio Economik.

Intéressé(e) par d'autres produits de la catégorie Microphones?

Voulez-vous voir les autres produits disponibles pour DPA?
Voici quelques suggestions qui pourraient vous intéresser;

Information

4017B-R Shotgun Microphone with Rycote Windshieldand Suspension Mount Kit

DPA Microphones has joined forces with Rycote to develop the d:dicate 4017B-R Shotgun Microphone with Rycote Windshield Solution. The strong suspension and windshield has been designed specifically to take the mic's compact size and light weight into consideration.

This kit provides everything an outside broadcaster, journalist or location film maker could need for clear, directional sound, regardless of weather and environmental conditions.

At just 210 mm (8.3 in) and 68 g (2.4 oz), this mic is one of the shortest and lightest shotgun condenser microphones available. At the same time, it offers impressive accuracy, clarity and musicality. The mic is fully immune to RF emission and the 19 mm (0.75 in) condenser cartridge is capable of handling peak SPLs of 152 dB before clipping.

Designed for a broad range of applications, the d:dicate Microphones Series is ideal for use with camera systems, in fixed positions at sports facilities, for broadcast/ENG/film booming and even studio recording environments.

The microphone capsule
The d:dicate 4017B-R Shotgun Microphone with Rycote Windshield is equipped with a highly-directional hypercardioid pickup pattern; obtained using a supercardioid design with an interference tube that provides excellent off-axis rejection. Its unique directional pattern is useful when you need exceptionally high directivity with high background noise rejection. It is convenient when you cannot place the mic close enough to the sound source. The MMP-B preamplifier is best if you want easily accessible high boost and low cut switches.

Extensive research and development has been undertaken to optimize the sound coming from the sides and back of the microphone. One of the key accomplishments is that we have minimized often very un-linear response of a shotgun microphone due to its side lobes. The condenser capsule uses a high voltage pre-polarized back plate, endowing the shotgun with high output as well as wide dynamics, extremely low noise and distortion specifications.

The d:dicate 4017B Shotgun Microphone features two onboard filters. They are activated via an ingenious switching ring design. With a simple twist of two sturdy rings, engineers can implement a high-frequency boost that adds a 4 dB shelf at 8 kHz. This compensates for hi loss when used with windjammers. A first-order bass roll-off below 120 Hz minimizes handling and wind noise. A permanent third-order high-pass filter at 50 Hz effectively removes unwanted low frequency disturbance from handling and wind noise.

The d:dicate 4017B Shotgun Microphone is also available without the Rycote Windshield.

At any time, and with no tools needed, it is possible to transform the d:dicate 4017B Shotgun Microphone into a new configuration. You can combine it with another d:dicate or d:facto Microphone Capsule or Preamplifier.

Caractéristiques

  • Small and lightweight
  • Excellent RF Immunity
  • Uniform off-axis response
  • Highly directional pattern
  • Spécifications

    Directional pattern: Supercardioid, lobe-shaped
    Principle of operation: Pressure gradient, with interference tube
    Cartridge type: re-polarized condenser
    Frequency range : 20 Hz - 20 kHz
    Frequency range, ±2 dB: 70 Hz - 20 kHz at 60 cm (2 ft)
    Sensitivity, nominal, ±2 dB at 1 kHz: 19 mV/Pa; -34.4 dB re. 1 V/Pa
    Epuivalent noise level, A-weighted: Typ. 14 dB(A) re. 20 Pa (max. 15 dB(A))
    Switchable filters: High boost, low cut
    Output impedance: < 150
    Output balance principle: Signal balanced
    Common Mode Rejection Ratio (CMRR): > 40 dB
    Power supply: 48 V Phantom power (±4 V)
    Current consumption: 4.5 mA
    Polarity: +V at Pin 2 for positive sound pressure

    Connector: XLR-3M
  • Pin 1: shield
  • Pin 2: signal + phase
  • Pin 3: - phase

  • Weight: 68 g (2.4 oz)
    Operating temperature range: -40 to 45°C (-40 to 113°F)
    Relative humidity: Up to 90%

    In the Box:
  • DPA Microphones 4017B-R Shotgun Microphone with Rycote Windshield
  • UA0639 Microphone Clip
  • DUA0073 Windscreen for 4017B
  • XLR Cable
  • Rycote Suspension Mount
  • Rycote Windshield
  • Rycote Fur Windjammer
  • Rycote XLR Holder
  • Rycote Brush
  • Maintenant offert
    Financement disponible
    Aimez-nous
    Suivez-nous
    ©2004-2024 - Studio Economik Inc.® Tous droits réservés.