Wide Cardioid Microphone, 130 V

The 4016 wide cardioid microphone is the high voltage (130 V) counterpart to the 4015. The two microphones are acoustically identical, but differ in their sound level handling. Due to the higher voltage supplied for the preamplifier via the DPA HMA5000, the 4016 can handle 168 dB SPL peak before clipping occurs!

It is designed with a linear on-axis frequency response from 40 Hz (±2 dB) to 20 kHz (+3/-2 dB) at 60 cm, with a soft high frequency lift from 10 to 15 kHz of max. 3 dB.

The off-axis characteristics of the 4016 wide cardioid microphone are totally linear, a unique quality when it comes to authentic sound reproduction. Any leakage that occurs from off-axis sound sources is still a faithful reproduction of these sounds, just softly attenuated.

Directional characteristics: Wide Cardioid

Principle of operation: Pressure gradient

Cartridge type: 19 mm (0.75 in) pre-polarized condenser

Frequency range, ± 2 dB: On-axis: 40 Hz to 20 kHz +3/-2 dB in 60 cm distance with a max. 3 dB soft boost at 10 - 15 kHz

Sensitivity, nominal, ±2 dB: 12 mV/Pa; -38 dB re 1 V/Pa

Equivalent noise level A-weighted: Typ. 19 dB(A) re. 20 µPa (max. 20 dB(A))

Equiv. noise level ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)

Total harmonic distortion (THD): <0.5% up to 110 dB SPL peak, <1% up to 116 dB SPL peak

Dynamic range: Typ. 97 dB

Max. SPL, peak before clipping: With HMA5000: 168 dB SPL peak

Output impedance: Matches HMA5000 input

Cable drive capability: From microphone to HMA5000: Up to 20 m (66 ft). From HMA5000: Up to 300 m (984 ft)

Power supply: 130 V via HMA5000

Connector: 4-pin modified XLR-M (High Voltage)

Weight: 165 g (5.8 oz)

Capsule diameter: 19 mm (0.75)

Length: 175 mm

Operating temperature range: -40 to +55C (-40 to 131F)