Comtek M-216
MPN #M-216
$835.00
Save 23.9%, MSRP $1097.00
The M-216 transmitter incorporates digital and analog technologies to produce low residual noise, wide dynamic range, and extended frequency response.
The transmitter's microcontroller automatically sets the modulation for companding or non-companding audio processing when the corresponding channels are selected. The channel selection also sets either narrow-band operation on channels 1-40 (5 kHz deviation) or high-fidelity, wide-band operation on channels 41-60 (10 kHz deviation). The optional microphone mute switch turns off the microphone without turning off the aux input.
Features
High Fidelity PerformanceAdaptive Channel SelectionDual Function Versatility
Specifications
Audio Input:
Microphone input impedance for electret type microphone - 3k ohm
Aux/Line input impedance - 10k ohm at 0 dB nominal
Connector:
Microphone - Micro-mini 2.5 mm mono (locking or non-locking)
Auxiliary - Mini 3.5 mm Stereo
Audio - Tip and Sleeve
Battery Charging - Tip and Sleeve
External 9V power - Ring and Sleeve
Controls and Indicators:
Power On/Off switch
Synthesized channel selection switches
Microphone mute switch (Optional)
Audio input gain control
Modulation voice level indicator
Antenna System:
Body-worn microphone cord or whip antenna plugged directly into microphone connector when auxiliary input it used
Frequency Response:
80 Hz to 10 kHz
Modulation:
5 kHz deviation Ch. 1-40 (non-companded)
10 kHz deviation Ch. 41-60 companded
RF Power Output:
10 mW to the antenna system
Out-of-Band Emissions:
Better than 45 dB below carrier
Current Drain:
17 mA constant current
Weight:
4 ounces (110 grams)
Battery:
9 V alkaline for up to 35 hours of operation
9 V Nickel-Metal Hydride rechargeable for up to 15 hours of operation
Dimensions:
1 1/6" x 2 1/2" x 3 1/4" (27 mm x 57 mm x 83 mm)
Write a review about the Comtek M-216
View more products from
Comtek