Cedar Audio DNS 2
MPN #DNS2
$4999.00
Save 16.7%, MSRP $5999.00
Portable 2 channel dialogue noise suppressor with LEARN, analogue mic/line inputs, line outputs, digital I/O and 12V operation
CEDAR's dialogue noise suppression (DNS) technology eliminates traffic noise, air conditioning, wind, rain, babble and general background noise from audio signals.
It will also help to compensate for unfavourable acoustic conditions and poor microphone placement, and will even suppress excessive reverberation.
The 2-channel DNS 2 is the first DNS designed specifically for portability and extreme simplicity of use. It hosts a new DNS algorithm that requires nothing more than switching on the Learn function that identifies and adapts to the background noise, and then dialing in the amount of noise attenuation required. Retaining the near-zero latency of all its predecessors, it's suitable for use in all situations - location recording, live-to-air broadcasting, live sound in venues such as theatres, concert halls, conferences venues, and places of worship, as well as studio work and post.
What's more, despite being so small and light that you can slip it inside your pocket or equipment bag, the DNS 2 offers analogue line and microphone inputs (the latter with optional 48V phantom powering), an AES3/AES11 digital input, and both analogue and digital outputs. This increases its flexibility even further, and its 12V power input means that you can use it in the middle of a field as easily as in the studio or the edit suite.
Features
Small, light and portableA unique DNS algorithm with super-fast setup and controlAnalogue (mic/line) and digital I/O12V power
Specifications
DSP
Two linkable channels of CEDAR DNS
Fully automatic processing in Learn mode
Floating point processor, 2.4 GFLOP/s, 40-bit resolution
Digital input and output (AES3)
AD/DA conversion
24-bit resolution
Sample rate (internal sync.) 48kHz
Sample rate (external sync.) 44.1kHz, 48kHz, 96kHz
Balanced analogue line inputs and outputs
Nominal level: +4dBu with 20dB headroom
Gain range: -6dB to +54dB
Dynamic range: > 102dB
Ultra low-noise microphone preamplifiers
Gain range: +18dB - +78dB
Dynamic range: >102dB (at 36dB gain)
Individually switchable phantom power
Power
8VDC to 17.5VDC (nominal 12V)
Power consumption: 4W typical, 6W maximum
Mains operation (85VAC - 250VAC) via supplied adapter
Physical
Dimensions: 164mm x 110mm x 44mm
Weight: <500g
Write a review about the Cedar Audio DNS 2
View more products from
Cedar Audio
