Designed for use with brass, saxophone and other instruments, the ATM350U is a cardioid condenser instrument microphone with universal clip-on mounting system (5" Gooseneck)
The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491U universal clip-on mount and strong, flexible AT8490 5" gooseneck, the mic can be clipped securely to the bell of your instrument and positioned to stay where you want it - the gooseneck won't flop around no matter how aggressively you move the instrument as you play.
The microphone's cardioid polar pattern isolates the instrument by reducing side and rear pickup, and the switchable 80 Hz high-pass filter on the in-line power module helps control undesired low-frequency noise. The system also includes an AT8468 violin mount with hook-and-loop fastener and a protective carrying case.
Caractéristiques
Low-profile mic design for minimum visibility
Crisp, clear, well-balanced microphone response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
UniMount universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
Rugged UniMount 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Included violin mount with hook-and-loop fastener provides an additional mounting option
Spécifications
ELEMENT: Fixed-charge back plate, permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 40 - 20,000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY: -49 dB (3.5 mV) re 1V at 1 Pa IMPEDANCE: 200 ohms MAXIMUM INPUT SOUND LEVEL: 159 dB SPL, 1 kHz at 1% T.H.D. DYNAMIC RANGE (typical): 130 dB, 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 65 dB, 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 11- 52V DC, 3.5 mA typical SWITCH: Flat, roll-off WEIGHT (MICROPHONE): 14.5 g (0.5 oz) WEIGHT (POWER MODULE): 90 g (3.2 oz) DIMENSIONS (MICROPHONE): 37.8 mm (1.49'') long, 12.2 mm (0.48'') maximum body diameter DIMENSIONS (POWER MODULE): 92 mm (3.62") long, 18.9 mm (0.74") diameter OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with HIROSE HR10-type connector OPTIONAL INTERCHANGEABLE ELEMENTS: UE-H hypercardioid (100), UE-O omnidirectional (360) ACCESSORIES FURNISHED: ATM350a cardioid condenser microphone; AT8543 power module; AT8491U UniMount universal clip-on mount; AT8490 UniMount 5" gooseneck; AT8468 violin mount (hook-and-loop fastener); protective carrying case AUDIO-TECHNICA CASE STYLE: M36
Écrire une évaluation à propos du Audio Technica ATM350U
4.5
Ken Myhr
Blue Mountain
24 octobre 2024
Excellent mic
I use this on cello. I originally bought it to run through my guitar pedal board which it does nicely but I've found it also works amazingly to record direct with it. I pair it with a large diaphragm condenser and I get a great stereo recordings. Very Lire plus
happy!
4.5
Ken Myhr
Blue Mountain
24 octobre 2024
Excellent mic
I use this on cello. I originally bought it to run through my guitar pedal board which it does nicely but I've found it also works amazingly to record direct with it. I pair it with a large diaphragm condenser and I get a great stereo recordings. Very Lire plus
