Following the huge success of Mini-Me, Apogee is excited to offer the latest addition to our Mini Series, Mini-DAC. This professional quality, 192kHz D/A converter, is the ultimate portable and compact solution for studio playback, reference monitoring, and premium home audio systems.

Professional, Portable, Affordable With the venerable AD-1000 in mind, Apogee set out to make a series of next-generation, compact, high quality converters that both audio professionals and home recording enthusiasts will not want to do without. And although Mini-DAC is built to go and priced to move (it's far less expensive than any Apogee D/A ever), it delivers a feature rich D/A converter that is unrivaled in the pro studio world.

Precision Reference Monitoring Are you using a massive mixer just to ride your monitor levels Or do you have a great A/D but inferior D/A Then make a little room for Mini-DAC. With comprehensive level control and a high quality headphone output you can hear exactly what you are committing to while recording. And when it is time to mix down, Mini-DAC provides the optimum stereo image and the most faithful analog reproduction of your carefully recorded digital audio that money can buy.

Ultimate Listening for Audiophiles Want to hear your music as it was intended Then Mini-DAC is the way to optimize your home audio system. Connect your premium CD/DVD player to Mini-DAC and then out to your speakers for a superb sonic experience that your discerning ears will appreciate.

Inputs include AES (single & double wide), Optical (ADAT, S/MUX & S/PDIF) coax

Analog Output level control for direct connection of powered monitors

Low-current, low-voltage -ideal for location/ENG

Digital thru mode adds USB functionality to any digital device including Apogee´s Mini-Me, Trak2 and Rosetta

INPUTS:

2 x AES-EBU on 9 pin D-Type (breakout cable to two female XLR-3 required) handling sample rates: 44.1k-192k single-wide and 88.2 k192k double-wide.

S/PDIF optical on TOS-LINK 44.1/48k

S/PDIF coaxial on RCA 44/1-192k

ADAT 44/1-48k

ADAT/SMUX II for 88/2/96k

ADAT/SMUX IV for 176.4/192k

OUTPUTS:

2 x XLR (pin 2 hot) for pro-audio stereo

1/8" jack for consumer-level stereo (standard 1/8" to RCA cable required) also able to drive headphone's

1/4" jack headphone

SPECS:

Output level xlr's: 24dBu max (internally or externally adjustable) ultra low impedance, high current drive balanced outputs.

Output 1/8": +10dBV max (fixed or externally adjustable)

Headphone out: 300mW into 30 ohm

Sample rates: 44.1/48-88.2/96-176/192 . All +/- 10%

Max word length: 24bit

Frequency response: 10-20k +/- 0.2 dB (at 44.1kHz)

THD+N: -107 dB

Dynamic range: 119 dB weighted

Inter channel crosstalk: -125 dB

Power consumption: 5W max.

Power source: 6-14 V DC. International (90-240V) power

adapter included