AMS Neve 1073 DPA, Two Legendary Mic Preamps in One Single Rackspace. This stereo unit is the perfect solution for studios looking to bring the legendary Neve 1073 sound.
A superb addition to the Neve outboard range, providing two of our world-famous Class A Neve 1073 microphone preamplifiers in a single rackspace. The 1073 is the mic preamp of choice for numerous leading producers and artists, delivering the unique Neve sound featured on some of the most famous recordings of the past 40 years.
The big, punchy sound of the 1073 compliments any musical genre, from rock to pop, hip-hop to rap, thrash to classical. Its lush sound with classic Neve signature makes it the consummate mic pre for recording vocals, guitars, and acoustic instruments of all descriptions. With the 1073DPA, the highly sought-after 1073 mic amp sound is now available in a cost-effective 1U stereo rackmount solution, without the additional EQ found on the classic 1073 unit.
The 1073DPA provides the legendary sound of Neve in a remarkably simple format. Two rear-panel Mic inputs and Line inputs feed dual Class A gain stages, with adjustable Gain control and selectable 48V available on the Mic inputs. Class A analogue outputs in XLR format are also found on the rear panel, controlled via adjustable front-panel ±10dB Trim controls. This stereo unit is the perfect solution for studios looking to bring in the very essence of the legendary Neve 1073 sound.
Caractéristiques
Dual Mic Preamps " Features two Class A Neve 1073 mic pre-amplifiers for high-quality sound.
Versatile Inputs " Accepts microphone, line, and instrument signals with switchable impedance.
Classic Neve Sound " Delivers the signature warmth and depth of the legendary 1073 design.
Phantom Power " +48V phantom power available for condenser microphones.
Trim Control " ±10dB trim for fine-tuning input levels.
High Headroom " Handles high signal levels with low distortion.
Transformer-Balanced Outputs " Ensures high-quality, low-noise analog output.
Rack-Mountable " Compact 1U 19" rack design for professional studio setups.
Universal Power Supply " Operates on 100-240V AC without the need for voltage selection.
Spécifications
General
Dual-channel Class A microphone pre-amplifier
Based on classic Neve 1073 design
1U 19" rack-mountable unit
Power Requirements
Rated Voltage: 100-240V AC
Rated Frequency: 47-63 Hz
Rated Current: 0.5A Max
Primary Protection Fuse: T5AH anti-surge (20mm x 5mm ceramic)
IEC mains connector
Red LED power indicator (+5V healthy when illuminated)
Input Specifications
Mic Input: Transformer coupled
Mic Input Impedance: Switchable 300? / 1200? (Hi-Z)
Mic Input Maximum Level: +6dBu
Mic Input Phantom Power: +48V switchable
Line Input Impedance: 20k?
Line Input: Electronically balanced
Line Input Maximum Level: +26dBu
Output Specifications
Line Output: Transformer balanced
Line Output Phase: Phase reversal available
Line Output Minimum Peak Level: +26dBu
Performance
Frequency Response (Mic, 60dB Gain, 600? Load): 20Hz to 20kHz ±0.5dB
Frequency Response (Mic, 60dB Gain, 600? Load): 20Hz to 40kHz -3dB
Equivalent Input Noise (Mic, 60dB Gain): <-125dB
Total Harmonic Distortion + Noise (+20dBu into 600?, 50Hz to 10kHz): <0.07%
Écrire une évaluation à propos du AMS Neve 1073 DPA
5.0
Terry
Langley, BC
18 juin 2024
Saturation station.
I use this on my 2 bus as well as my synth keyboard input.
Sounds fantastic, the magic happens when you crank the input to the max and pull the trims back and ease in the input till it's just right.
5.0
Karl Joseph
26 novembre 2018
merveilleux
J'ai vendu le reste de mon studio courtoisie de ce bijou la. La qualité est au rendez vous.
5.0
L.Bessette
20 juin 2018
Fantastique
C'est le module par excellence! Je l'utilise surtout pour la batterie et les vocales. Sans casse-tête, tu es certain que le son sera clair, précis.
