Vanguard Audio Labs V1S gen2 Pencil Kit
MPN #V1S
$1695.00
Save 9.5%, MSRP $1873.00
Two FET pencil microphones, eight 22mm capsules, two 34mm large capsules, dual shockmounts, stereo bar, pinewood case, low-noise premium components
The long-awaited 2nd-generation Vanguard V1S is a matched pair of multi-capsule FET pencil condenser microphones. Eight matched custom small-diaphragm capsules in 4 pickup patterns " Cardioid, Hypercardioid, Wide Cardioid, and Omnidirectional " allow for a cornucopia of tonal variations for virtually any sound source. We've upgraded the electronics with a high-end dual-monolithic parallel JFET and US-made audiophile resistors for an even better signal-to-noise ratio, and changed the color to a smooth cosmos black for use in stage & video environments. With premium cryogenically-treated FET componentry, American-made audiophile-grade resistors, an unparalleled selection of capsules, and a true heavy-duty VSSM shockmount, the V1S will be your new "go-to" set of small-diaphragm condenser microphones, whether you're in the studio or the field.
Quality
The V1S was designed in the USA, and undergoes final assembly in sunny Southern California. We perform 100% quality control " every single part of your V1S kit undergoes a series of stringent audio and visual tests here in Southern California before being hand-packed. We precision-bias each high-grade JFET by hand.
Every part of the V1S was designed to be robust and reliable. Wherever possible, the circuitry is over-spec'ed. Deep-cycle cryogenic treatment improves the lifespan and performance of critical electronic components. Brass, steel, and zinc are part of the heavy-duty construction.
Design
The VANGUARD V1S gen2 is very different from other microphones in its price range. It is designed and precision-built in limited quantities to "no-compromise" standards, with hand assembly and 100% testing taking place here in Southern California. We spent more than three years designing, developing and refining the V1S.
Our small-diaphragm capsules begin with a 16mm 4µm gold-sputtered Mylar diaphragm, carefully positioned in front of a precision-machined, custom-voiced backplate. We engineered the housing to bring the diaphragm as close as possible to the front of the capsule housing, preventing comb filtering.
The capsule is coupled to a transformer-balanced solid-state circuit that matches the unique musical properties of our capsules and is loaded with premium-grade, over-spec components sourced from manufacturers all over the world. We cryogenically treat critical components in the signal & power paths, including an ultra-high-grade hand-biased dual-monolithic FET.
In our entire lineup of gen2 microphones, we chose to use US-made, low-noise audiophile-grade resistors. This takes the noise floor of the V1 from a very quiet gen1 to a nearly undetectable gen2.
The circuit is designed with an "In = Out" philosophy, with only four components present in the signal path.
Aesthetically, we made a collective decision to go "all-black" for the V1 gen2. With its was a common customer request for use in video and live applications without being a visual distraction. We chose a non-reflective matte finish to make the V1 gen2 as stealthy as possible. We still integrate our signature precision-cast Vanguard badge. Each microphone's serial number is laser-engraved on the lower rear of the microphone.
The V1S was designed by a team of experts with more than 65 years of experience and vetted by award-winning engineers and producers.
Features
Capsule & Electronics
Eight small-diaphragm 22mm capsules " cardioid, hypercardioid, omnidirectional, wide cardioid (pairs)Transformer-balanced solid-state circuit with premium-grade over-spec circutiryUltra low-noise high-quality hand-biased dual-monolithic JFET and other premium-grade componentsDeep-cycle cryogenic treatment of critical signal & power path componentsTransformer-balanced output " custom-wound humbucking dual-bobbin transformer48V phantom power
Construction & Aesthetics
Heavy-duty brass, steel, and zinc constructionEach V1 comes with its own laser-engraved serial numberOver-spec componentryStealthy Matte Black FinishPrecision-cast Vanguard badgeHand-Assembled & 100% Quality Control in California, USA
Specifications
Transducer Type: CondenserCapsule Size (Small-Diaphragm): 0.87?/22mmDiaphragm Size (Small-Diaphragm): 0.78? / 16mmCapsule Diaphragm Thickness (Small-Diaphragm): 4µmElectronics Type: Solid-state, transformer-balanced outputOutput Impedance: 200?Max SPL: >=136dB (0.5% THD @ 1000Hz)Frequency Response: 20Hz-20kHzEquivalent Noise Level: < 13dbAS/N Ratio : ?81dB (Ref. 1Pa A-weighted)Sensitivity: -39dB @ 1PaOutput Connector: Male XLR 3-pin, gold-platedHigh-Pass/Rolloff Switch: N/AAttenuation/Pad Switch: N/AFinish: Matte BlackWeight (microphone): 4.79oz / 136gWeight (in case): 5.6lbs / 2.54kgDimensions (microphone): 142mmL, 22mmØDimensions (case): 15.83"L x 13.5"W x 3.94"H / 402mmL x 343mmW x 100mmHVoltage Requirement: Phantom Power (+48V ideal)
What's Inside
Two Vanguard V1 gen2 Microphones " packed with high-end componentry including an ultra-quality precision-biased dual-monolithic JFET, a custom-wound transformer, premium capacitors, US-made audiophile-grade resistors, and cryogenic treatment throughout. A "straight-wire" design philosophy means there's only four components between the capsule and the output.
Eight 22mm Capsules " these interchangeable capsules give you unmatched flexibility " two each of cardioid, wide cardioid, hypercardioid, and omnidirectional patterns. Ultra-sensitive 4-micron diaphragms, an anti-comb-filtering front design, and precision-machined backplates give wide consistency across each capsule.
Two VSSM Shockmounts " the best pencil shockmount in the ?verse. Heavy-duty diecast zinc partners with high-impact ABS to create a shockmount that stays where it's supposed to. Aerospace-grade suspension rings keep the rumble out (no hair scrunchies here!), and a windowed design allows you to easily access switches without changing the your mic placement.
Stereo Microphone Bar " Easily set up X/Y, ORTF, or other stereo mic'ing configurations.
Locking Aluminum Storage Case " because your microphones should stay safe in luxury. Custom-cut high-density foam keeps your mics and capsules cozy and secure...whether they're on the road or in your studio.
Included Accessories
22mm removable capsule " Cardioid (pair)
22mm removable capsule " Hypercardioid (pair)
22mm removable capsule " Omnidirectional (pair)
22mm removable capsule " Wide Cardioid (pair)
VSSM small shockmount (pair)
Locking Aluminum Storage Case
Stereo microphone bar
Write a review about the Vanguard Audio Labs V1S gen2 Pencil Kit
View more products from
Vanguard Audio Labs
