Dynalux

Dual-Channel Compression: Two independent channels in one 2U rack unit, usable in mono, stereo, or variable link mode.

Signature Tonelux Circuitry: Built with proprietary Tonelux op-amps, output stage, and transformers for rich, clear tone.

Blended Compression Types: TYPE control lets you fade between classic feedback and modern feed-forward compression styles.

True Parallel Compression: Built-in MIX knob blends compressed and dry signals right in the unit-no external routing needed.

Flexible Dynamics Control: Adjustable threshold, attack, release, ratio (1.5:1 to 20:1), plus extreme "Over" compression mode.

Automatic or Manual Gain Make-Up: Choose between auto gain leveling or manual adjustment to match output levels.

TILT EQ and IPN Filter: Sidechain EQ adds high-end presence or tightens low-end response; IPN mimics human hearing for better dynamic behavior.

External Sidechain Inputs: Use external sources to trigger compression for creative mix control (e.g. ducking effects).

Fast to Smooth Attack Options: Includes an X5 switch for ultra-fast microsecond attack settings.

Smart Release Circuit: Auto-adjusting multi-stage release adapts to frequency for transparent control.

Dual Mono or Stereo Linking: Use channels independently, or in stereo with full linking and control handoff.

Varilink Control: Fine-tune how much channel 1 and 2 influence each other's dynamics for a hybrid stereo/mono response.

Four VU Meters: Input/output levels and gain reduction clearly displayed per channel.

Transformer-Coupled Output: Adds optional analog warmth when not bypassed.

Bypass Safe on Power Loss: Automatically routes input directly to output if power is lost.

Rackmount Ready: 2U chassis with front-panel switches and controls for easy studio use.

General Specifications:

Dual channel analog compressor in 2U 19 inch rackmount unit

Fully discrete design using Tonelux proprietary TX 240 op amps

Transformer output stage using Tonelux TX 100 transformers and TX 260 line driver

Transformer output active when dynamics are engaged and not bypassed

Unit defaults to hard bypass mode on power failure

External sidechain input per channel via balanced quarter inch TRS jack

Internal sidechain with dedicated TILT EQ and IPN filter

Can operate in dual mono, stereo master slave, or VARILINK linked modes

VARILINK allows dynamic linking between channels with adjustable LINK percentage

Quiescent noise less than minus 95 dBu with dynamics out and not bypassed

Self noise less than minus 92 dBu with dynamics in and not bypassed

Frequency response less than 5 Hz to 70 kHz at minus 3 dBu

Bypass switch allows input to output direct connection

Dynamic IN switch engages or disengages dynamics path

CONTROLS ACTIVE indicator per channel

All toggle switches active in up position

Compression Controls:

TYPE control blends compression styles between 100 percent feedback and 100 percent feed forward

RATIO control variable from 1.5 to 1 up to 20 to 1

OVER COMPRESSION range available beyond 20 to 1 for negative ratio limiting

AUTOGAIN automatically compensates level in OVER COMPRESSION mode

MAKEUP GAIN manual output boost control from 0 to plus 15 dBu

THRESHOLD control variable from minus 20 dBu to plus 20 dBu

ATTACK control variable from ultra fast microsecond range to 50 milliseconds

X5 switch enables extended ultra fast attack response

RELEASE control variable from instantaneous to 3 seconds

Three stage release circuit provides faster release for high frequencies

MIX control for parallel compression from fully dry to fully wet

MIX center position provides equal 50 percent dry and 50 percent wet signal

Sidechain Features:

External sidechain input per channel switchable via EXT S/CH toggle

Sidechain input normalized to channel input when not in use

TILT EQ boosts highs and cuts lows or vice versa up to 6 dB

IPN Inverse Power Noise filter simulates human ear response for more musical detection

TILT and IPN filters only affect sidechain signal going into RMS detector

Stereo Linking and VARILINK:

Operates in dual mono mode with independent channel control

Operates in stereo master slave mode with channel one as control master

VARILINK allows dynamic interaction between channels via control voltage sharing

LINK percentage control variable from 50 percent to 100 percent

Control voltage from either channel can influence the other in both directions

Enables reactive compression based on whichever channel has the dominant signal

Metering and Indicators:

Two analog VU meters per channel

Upper VU meter selectable for input or output via MTR switch

Lower VU meter dedicated to gain reduction display

Gain reduction meter active regardless of dynamics in or out status

TH LED indicates signal exceeding set threshold

CONTROLS ACTIVE LED indicates dynamics path is engaged

Metering always reflects true signal processing conditions

Use Case and Applications:

Suitable for tracking, mixing, mastering, and bus compression

Parallel compression, extreme transient shaping, and transformer coloration in one unit

Ideal for drums, vocals, keys, stereo program, or aggressive dynamic control

Designed for high end studio use requiring sonic flexibility and analog warmth

Rear Panel Connections:

XLR input and output per channel

Quarter inch TRS external sidechain input per channel

IEC power connector