Tascam MM-4DIN-X

4 Mic/Line Inputs with Phantom Power (XLR): Handles mic or line-level sources with +48V phantom power for condenser mics.

Remote Mic Gain Control: Adjust input levels remotely via control software or Dante network.

4 Dante Inputs and 4 Dante Outputs: Seamless connection and integration into Dante-based systems.

Built-In DSP with 8x4 Matrix Mixer: Route and mix analog and Dante inputs to any output zone with onboard processing.

Advanced Audio Processing Tools: Includes EQ, compression, ducking, auto-level, noise compensation, and limiter.

Studio-Quality TASCAM Preamps: Delivers ultra-low noise and high headroom for clean, professional audio.

PoE Powered: Operates using a single network cable for both power and data.

Remote Control Software Options: Use DCP CONNECT for advanced configuration or EZ CONNECT for basic controls.

Compact Half-Rack Design: Mounts easily in tight spaces or under desks using included brackets.

Signal and Network Status Indicators: Visual monitoring of input activity and Dante network health.

General Specifications

4 channel mic line input with phantom power support XLR

Remote mic gain control via Dante or software

4 Dante input and output channels

Built in DSP with 8 in 4 out matrix mixer

24 bit resolution with sampling rates of 44.1 48 88.2 96 kHz

Half rack mountable size

Signal indicators for input monitoring

Scene preset function with up to 50 presets

Supports Dante daisy chaining

PoE Power over Ethernet class 0 support

Compatible with TASCAM DCP CONNECT and EZ CONNECT software

Remote control via Dante

Compatible with Windows macOS iOS and Android

Includes surface mount brackets

Optional rack shelf AK RS1 for dual unit installation

Audio Performance

Mic amp EIN minus 125 dBu

Frequency response 20 Hz to 20 kHz at 44.1 48 kHz and 20 Hz to 40 kHz at 88.2 96 kHz

Distortion THD plus N 0.003 percent

Signal to noise ratio 108 dB

Crosstalk 100 dB

Dynamic range 108 dB

Analog Inputs

Connector XLR 3 31 balanced

Minimum input level minus 70 dBu

Maximum input level plus 26 dBu

Input impedance 2 k ohms or higher

Dante Interface

Connector RJ45

Protocol Dante

Ethernet standard 1000BASE T IEEE 802.3ab

Cable requirement Cat 5e or higher STP cables

Power and Environmental

Power supply PoE class 0 or optional TASCAM PS P1220E

Power consumption 7.5W

Operating temperature 0 to 40 degrees Celsius

Dimensions 214 x 44.45 x 136.1 mm

Weight 885 grams

Included Items

MM 4D IN X unit

Installation brackets x 2

Owner's manual with warranty