The pro's choice. Renowned sound engineers rely on ew 500 G4's flexibility, especially when handling multi channel settings on the world's music stages.
Up to 88 MHz bandwidth, up to 32 channels. Ethernet connection for Wireless Systems Manager (WSM) control software included for advanced frequency coordination in multi channel setups.
The pro's choice for impressive presentations. The professional MKE 2 Gold omni-directional condenser microphone resists the test of time on any big live stage and ensures a high speech intelligibility on any stage, indoors and outdoors.
Caractéristiques
True diversity half-rack receiver in a full-metal housing with intuitive OLED display for full control
Easy and flexible wireless synchronization between transmitter and receiver via infrared
Up to 32 compatible channels
Up to 88 MHz bandwidth with 3520 selectable frequencies, fully tunable in a stable UHF range
Ethernet connection for Wireless Systems Manager (WSM) control software for advanced frequency coordination in multi-channel setups
High RF output power (up to 50 mW, adjustable in three steps 10/30/50) depending on country regulations
Spécifications
EM 300-500 G4 Frequency Range: Gw1: 558-608 MHz Dimensions: Approx. 202 x 212 x 43 mm Compander: Sennheiser HDX THD, total harmonic distortion: 0.9 % Weight: Approx. 980 g Audio output: 6.3 mm jack socket (unbalanced): +12 dBu XLR socket (balanced): +18 dBu Signal-to-noise ratio: 115 dBA Switching bandwidth: up to 88 MHz Peak deviation: ±48 kHz Nominal deviation: ±24 kHz Modulation: Wideband FM Power supply: 12 V DC Antenna connector: 2 BNC sockets Current consumption: 350 mA Adjacent channel rejection: Typically 75 dB Intermodulation attenuation: Typically 70 dB
Receiving frequency
Max. 3520 receiving frequencies
adjustable in 25 kHz steps
20 frequency banks
each with up to 32 factory-preset channels
no intermodulation
6 frequency banks with up to 32 programmable channels
RF sensitivity: < 2.5 V for 52 dBA eff S/N Squelch: 5 to 25 dBV in steps of 2 dB
Equalizer
Preset 1: Flat
Preset 2: Low Cut (-3 dB at 180 Hz)
Preset 3: Low Cut/High Boost (-3 dB at 180 Hz, +6 dB at 10 kHz)
Preset 4: High Boost (+6 dB at 10 kHz)
Temperature Range: -10 C to +55 C Receiver Principle: True diversity Blocking: 75 dB
SK 500 G4 Frequency Range: Gw1: 558-608 MHz Dimensions: Approx. 82 x 64 x 24 mm Compander: Sennheiser HDX THD, total harmonic distortion: 0.9 % Weight: (incl. batteries) approx. 160 g Signal-to-noise ratio: 115 dBA
RF output power (switchable)
Low: typ. 10 mW
Standard: typ. 30 mW
High: typ. 50 mW
Switching bandwidth: up to 88 MHz Peak deviation: ±48 kHz Nominal deviation: ±24 kHz Operating time: Typically 8 h Modulation: Wideband FM Power supply: 2 AA batteries, 1.5 V or BA 2015 accupack
Current consumption
at nominal voltage: typ. 180 mA
with transmitter switched off: 25 µA
Input impedance: 40 k, unbalanced / 1 M Max. Input voltage: 3 Veff Powering: 3 V battery / 2.4 V rechargeable battery
Transmission frequency
Max. 3520 frequencies
Adjustable in 25 kHz steps
20 frequency banks
each with up to 32 factory-preset channels
No intermodulation
6 frequency banks with up to 32 programmable channels
AF frequency response: Mic: 80 - 18,000 Hz, Line: 25 - 18,000 Hz Temperature Range: -10 C to +55 C Frequency stability: ±15 ppm
MKE 2 Connector: 3.5 mm jack Frequency response: 20 to 20.000 Hz ± 3 dB Max. sound pressure level: 142 dB Cable length: approx. 1.60 m Transducer principle: pre-polarized condensor microphone Pick-up pattern: omni-directional Sensitivity in free field, no load (1kHz): 5 mV/Pa, ± 3 dB Equivalent noise level: 26 dB Equivalent noise level weighted as per CCIR 468-3: 39 dB
