Sorry, the product Schertler Yellow Mic 500 TO is not available anymore on Studio Economik's website.

Interested in other Mic Preamps products?

Do you want to see other Schertler products?
We have a few suggestions you could be interested in;

Information

The Schertler YELLOW MIC500 is a single channel, full Class A, 500 series microphone preamp specially designed for user installation in an 500 series Lunchbox rack

Available in three models, MIC500-TL, -TO and -TT, the YELLOW MIC500's high quality electronics are contained within a totally shielded metal enclosure, while an anodized aluminium front panel provides intuitive access to its controls. These include a 12-step rotary switch for adjusting input sensitivity (in 3dB increments), plus an extra gain control for use in weak signal conditions or when connecting low output sources such as ribbon mics.

A full 10-segment VU meter with peak hold provides highly accurate signal monitoring. A two-position phase reverse switch and phantom power switch (+48V) are also included. Designed to offer the best possible audio quality, the YELLOW MIC500 has a fully balanced signal path with no capacitor over the entire path (except for the TT model). Only discrete electronics are used on the signal circuitry.

Power supply rails with active filter are designed to improve Power Supply Rejection Ratio (PSSR). All models include a low-noise matched transistor array from THAT Corporation. The TO model offers a high-quality audio transformer from Lundhal on the output connection.

No Negative Feedback (NFB) is applied for faster attack and improved slew rate. The YELLOW MIC500 simply slots into an available space in the Lunchbox rack and is secured to the chassis using supplied screws. The preamp is ready for instant use on power-up

Specifications

Input impedance: TO model: 1880 Ohm
Output impedance: TO model: 315 Ohm
Maximum input level: +8dBu (@1kHz ; THD<0,5%)
Maximum output level: +18dBu (@1kHz ; THD<0,5%)
Gain range: 15 68 dB
Frequency response: 20Hz 20kHz +/ 0.5 dB
Equivalent input noise (EIN): 128.7dB (150 Ohm ; @max gain)
Distorsion (THD+N): < 0,02 % (@1kHz ; 10 dBu)
Power consumption: 84 mA DC
Size & Weight: 170x134x37 mm ; 0,27 kg
Conditions: Use in dry locations, 0°<T< 40°
Now accepting
Financing available
Like us
Follow us
©2004-2024 - Studio Economik Inc.® All Right Reserved.