UPC/EAN #615104085954     MPN #008595    

$969.00

Save 19.2%, MSRP $1199.00
Financing available
Free shipping in Canada. Conditions

Cardioid capsule head with low frequency rolloff, capsule woodbox, nextel. Compatible with KM A (analog) or KM D (digital) output stages. Nickel finish



The KK 145 is a pressure gradient transducer with cardioid characteristic just like the KK 184. However, it has an acoustic bass roll-off in the free field and therefore suppresses LF interference (wind, structure-borne noise). Since proximity effect is a natural feature of pressure gradient microphones, the KK 145 is optimized for a flat frequency response at a recording distance of approximately 15 cm (?speech cardioid").
  • Nickel
  • Wide Cardioid Pattern
  • Acoustical operating principle: Pressure gradient transducer
    Directional Pattern: Cardioid low frequ. roll-off
    Frequency Range: 20 Hz...20 kHz
    Sensitivity at 1 kHz into 1 kohm: 14 mV/Pa
    Rated Impedance: 50 ohms
    Rated load impedance: 1000 ohms
    Equivalent noise level, CCIR¹: 22 dB
    Equivalent noise level, A-weighted²: 14 dB-A
    Maximum SPL for THD 0.5%³: 138 dB
    Maximum SPL for THD 0.5% with preattenuation: 148 dB
    Signal-to-noise ratio, CCIR (re. 94 dB SPL): 70 dB
    Signal-to-noise ratio, A-weighted (re. 94 dB SPL): 80 dB
    Supply voltage (P48, IEC 61938): 48 V
    Current consumption (P48, IEC 61938): max. 3.5 mA
    Matching connector: XLR 3 F
    Weight (output stage): 70 g
    Weight (capsule only): 15 g
    Diameter: 22 mm
    Length (capsule only): 18 mm
    Length (microphone): 108 mm

    ¹ according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
    ² according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
    ³ measured as equivalent el. input signal
    measured as equivalent el. input signal
    according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
    according to IEC 60268-1; CCIR-weighting acccording to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS
    View more products from Neumann
    Neumann Logo
    Now accepting
    Financing available
    Like us
    Follow us
    ©2004-2024 - Studio Economik Inc.® All Right Reserved.