iLoud Precision 5 MKII

Built in ARC X room correction with included MEMS microphone that auto tunes response to your room and supports multiple calibration profiles and speaker emulations

Ultra linear response plus or minus 1 dB from 46 Hz to 22.5 kHz with extended low end to 39 Hz at minus 4 dB and down to about 30 Hz with ARC

Time coherent linear phase monitoring via 96 kHz DSP and sixth order linear phase crossover at 1.5 kHz

Graphene reinforced 1.5 inch tweeter and 5 inch ultralight coated paper mid woofer for high frequency detail and fast low distortion transients

135 W total RMS custom Class D amplification with 110 W LF short term and 25 W HF short term with 0.005 percent amplifier THD

High output with low fatigue 101.6 dB continuous and 113.3 dB peak SPL free field at 1 meter with coherent phase 0 to plus 20 degrees from 150 Hz up

Adjustable voicing and management with high pass filter options off 35 50 65 80 Hz LF desk mid and HF contour trims and plus or minus 5 dB input gain trim

Unit to unit consistency of plus or minus 0.5 dB for accurate matching and additional 0 to 10 ms delay for distance and time alignment

Controlled dispersion plus or minus 50 degrees vertical and damped HDF enclosure for reduced resonance and precise imaging

iLoud Isolation Pods included to decouple from surfaces with bottom and rear mounting points available for immersive setups

Low latency 2.46 ms time of flight monitoring designed hand assembled and individually calibrated to tight tolerances in Italy

In the box Precision 5 MKII monitor power cord ARC microphone with clamp USB B to USB A 2.5 meter cable and 4 Isolation Pods

Speaker Configuration

Woofer: 5 inch ultralight coated paper mid-woofer

Tweeter: 1.5 inch graphene-reinforced textile dome tweeter

Crossover frequency: 1.5 kHz

Crossover type: 6th order linear phase

Amplification and DSP

Amplifier type: Custom-designed Class-D

Total RMS power: 135 watts(LF amp: 110 watts (short term), HF amp: 25 watts (short term))

DSP sampling rate: 96 kHz

Latency: 2.46 milliseconds

Additional delay: Adjustable 0 to 10 milliseconds

Amplifier distortion: 0.005 percent at nominal power

Performance and Frequency Response

Frequency response: 46 Hz to 22.5 kHz (plus or minus 1 dB)

Low frequency extension: 39 Hz at minus 4 dB

Phase response: Coherent, maximum 20 degrees from 150 Hz up

Phase rotation at 100 Hz (HPF off): Maximum 50 degrees

Directivity vertical: Plus or minus 50 degrees

Sound Pressure Levels

Max SPL (continuous, free field, 1 meter): 101.6 dB

Max SPL (peak, free field, 1 meter): 113.3 dB

Max SPL (peak, half space, 1 meter): 115.3 dB

Tuning and Controls

High-pass filter: Off, 35 Hz, 50 Hz, 65 Hz, 80 Hz

LF contour: minus 10 dB to plus 6 dB

Desk contour: minus 10 dB to 0 dB

Mid contour: minus 4 dB to plus 4 dB

HF contour: minus 6 dB to plus 6 dB

Input sensitivity: minus 14 dBu equals 86 dB SPL

Input gain trim: plus or minus 5 dB

Calibration and ARC X Integration

Built-in ARC X room correction

Remote control compatible for ARC profile switching and calibration control

Compatible with ARC X software for macOS and Windows

Dimensions and Weight

Dimensions (height x width x depth): 30.5 x 17.7 x 24.8 centimeters

Weight: 6.4 kilograms

Environmental

Operating temperature: 0 to 35 degrees Celsius (non-condensing)

Build and Construction

Enclosure: HDF with enhanced internal bracing

Cabinet design: Vented

Includes isolation pods for decoupling from surfaces

Mounting points: Bottom and rear (for immersive audio setups)

Additional Highlights

Time-coherent and linear-phase response

Unit-to-unit consistency within plus or minus 0.5 dB

Graphene tweeter for enhanced transient response

Designed, assembled, and acoustically calibrated in Modena, Italy

Included in the Box

1 x iLoud Precision 5 MKII monitor (black)

Power cord

ARC MEMS measurement microphone

ARC microphone clamp

USB-B to USB-A cable (2.5 meters)

Kit of 4 iLoud Isolation Pods