32Classic 16Ch console, includes Dante

16 mono input channels with classic Harrison 32C 4-band EQ and high/low filters; inline architecture supports tracking and mixdown on the same strip.

Per-channel "Return" input feeding a separate stereo Return mix, enabling high-count mixdowns.

8 mono mix buses (pairable for stereo subgroups) with inserts, pan-to-pair, meters, mute/solo, and Main Mix assign.

4 mono AUX sends plus 1 stereo AUX; masters with level, solo and ability to feed Main Mix.

3 stereo foldback/cue/matrix mixes with talkback integration and "All Talk" to all cue outputs.

Main stereo mix bus with insert, 0 dB fader lock, and selectable Jensen transformer-balanced output for analog color.

Integrated pro A/D and D/A conversion with Audinate Dante networking up to 64x64 channels at 96 kHz; two Dante interfaces (channel I/O and master I/O) with front-panel status LEDs.

Converter/Dante cards provide 32x32 analog I/O on DB25, dual RJ45 Dante ports, and TTL wordclock input; sample rates 32"96 kHz.

Dante clocking: operate as network slave or master (internal or external TTL wordclock).

Prewired Dante channel maps for channels 1"16 I/O and master section sends/returns.

Comprehensive monitor section: stereo control-room with ALT speakers, headphone out, DIM/Mono/L-R mutes, plus 11.1 or 7.1.4 surround monitoring via 12 Dante inputs.

External monitor sources: two analog stereo inputs and a Dante stereo input, sum-selectable.

Front-panel mic/instrument input on the master module, assignable to any channel; matches channel-strip preamp character, with 48 V and pad.

Fully balanced analog I/O on DB25 (AES59/Tascam pinout); duplicated outputs let you use Dante and analog simultaneously.

Metering everywhere: 20-segment LED meters on channels, buses, and main; meter-bridge analog meters; global Peak Hold/Clear and a meter "Light Show."

Robust DAW-friendly frame with concealed cabling, long-life pots and faders, and all-electronic switching.

General Specifications:

Console configuration 16 channel Harrison 32Classic including Dante

Module type 32C input strips with transformer balanced mic preamps and 32C four band EQ

Inline or split operation with channel insert and direct out on every channel

Universal internal power supply and fanless cooling

Microphone Input:

Gain range 20 dB to 70 dB in stepped increments

Equivalent input noise better than minus 129 dBu

Transformer balanced and earth free

Line Input:

Input impedance 10000 ohms bridging

Trim range plus or minus 9.5 dB

Maximum input level plus 24 dBu

Transformer balanced and earth free

Output:

Maximum output level plus 24 dBu

Output impedance 30 ohms typical

Main mix output 75 ohms when output transformer engaged

Balanced and earth free

Distortion and Noise:

THD less than 0.01 percent at 50 dB gain

Frequency response 20 Hz to 20 kHz plus or minus 0.25 dB

Converter THD plus N less than 0.01 percent at plus 4 dBu

Dante Interface:

Installed Dante and converter cards two cards each 32 in by 32 out

Total Dante capacity 64 by 64 at 44.1 or 48 kHz or 32 by 32 at 88.2 or 96 kHz

Primary RJ45 Dante network port and BNC word clock input

Typical mapping Dante playback to channels 1 to 16 and Dante direct outs from channels 1 to 16

Controls and Switches:

100 mm faders with solo and mute per channel

EQ in or out and filter in or out per channel

Bus assign switches and pre or post direct out select

Monitor source select speaker select and dim controls