Audio Technica AT2020PK
UPC/EAN #042005197095
MPN #AT2020PK
The AT2020PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup
The pack includes an AT2020 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.
The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360 rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.
The rugged AT2020 side-address studio condenser microphone features a low-mass diaphragm that is custom-engineered for extended frequency response and superior transient response for excellent vocal reproduction. The microphone offers a wide dynamic range and handles high SPLs with ease. Its analog XLR output connects easily to a digital converter or mixer.
Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica's critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.
Features
AT2020 Cardioid Condenser Microphone
The price/performance standard in side-address studio condenser microphone technologyIdeal for vocal pickupHigh SPL handling and wide dynamic range provide unmatched versatilityCustom-engineered low-mass diaphragm provides extended frequency response and superior transient responseCardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound sourcePivoting, threaded stand mount attaches securely for easy and precise placement of the microphone
ATH-M20x Professional Monitor Headphones
Advanced build quality and engineering40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coilsTuned for enhanced low-frequency performanceCircumaural design contours around the ears for excellent sound isolation in loud environmentsConvenient single-side cable exit
Adjustable Studio Boom Arm
Full 360 rotationAdjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphoneClamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thickIncluded XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom armInternal cable management for clean desk appearance
Specifications
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 20-20,000 Hz
OPEN CIRCUIT SENSITIVITY : -37 dB (14.1 mV) re 1V at 1 Pa
IMPEDANCE: 100 ohms
MAXIMUM INPUT SOUND LEVEL: 144 dB SPL, 1 kHz at 1% T.H.D.
NOISE: 20 dB SPL
DYNAMIC RANGE (typical): 124 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 74 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 48V DC, 2 mA typical
WEIGHT: 345 g (12.1 oz)
DIMENSIONS: 162.0 mm (6.38") long, 52.0 mm (2.05") maximum body diameter
OUTPUT CONNECTOR: Integral 3-pin XLRM-type
ACCESSORIES FURNISHED: Stand mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
AUDIO-TECHNICA CASE STYLE: R7
ATH-M20x Headphones Specifications
Type: Closed-back dynamic
Driver Diameter: 40 mm
Magnet: Neodymium
Voice Coil: Copper-clad aluminum wire
Frequency Response: 15 - 20,000 Hz
Maximum Input Power: 700 mW at 1 kHz
Sensitivity: 96 dB
Impedance: 47 ohms
Weight: 190 g (6.7 oz), without cable and connector
Cable: 3.0 m (9.8'), straight, left-side exit
Accessories Included: 6.3 mm (1/4") snap-on adapter
Write a review about the Audio Technica AT2020PK
View more products from
Audio Technica
